Ubuntu
hal-info package

Multiple hotkeys don't work with Samsung R70 T7300 Despina

Bug #219116 reported by drunkenkilla
8
Affects Status Importance Assigned to Milestone
hal-info (Ubuntu)
Invalid
Medium
Chris Coulson
Nominated for Hardy by drunkenkilla
Nominated for Intrepid by drunkenkilla

Bug Description

the screen brightness doesn't work with the FN-Keys of the notebook Samsung R70 T7300 Despina with ubuntu 8.04 beta.

dmesg:

[ 385.374091] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[ 385.374109] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[ 385.609502] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[ 385.609525] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[ 385.798838] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[ 385.798852] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[ 386.090549] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
[ 386.090571] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
[ 386.320837] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
[ 386.320860] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
[ 386.515299] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
[ 386.515321] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
[ 386.750721] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[ 386.750745] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[ 387.011706] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
[ 387.011720] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.
[ 387.257359] atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
[ 387.257382] atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
[ 387.513233] atkbd.c: Unknown key pressed (translated set 2, code 0x89 on isa0060/serio0).
[ 387.513255] atkbd.c: Use 'setkeycodes e009 <keycode>' to make it known.

sudo lspci -vvnn:

ping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 255
 Region 0: Memory at f0401400 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 Kernel driver in use: ricoh-mmc
 Kernel modules: ricoh_mmc

05:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 04)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 255
 Region 0: Memory at f0401800 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

05:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
 !!! Unknown header type 7f

drunkenkilla@drunkenkilla-laptop:~$ clear

drunkenkilla@drunkenkilla-laptop:~$ sudo lspci -vvnn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel modules: intel-agp

00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: cc000000-ceffffff
 Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [88] Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Capabilities: [80] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 41c1
 Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise-
   Slot # 1, PowerLimit 75.000000; Interlock- NoCompl+
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Off, PwrInd On, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet+ LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [140] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at 1800 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 21
 Region 4: I/O ports at 1820 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at f0504000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Kernel driver in use: ehci_hcd
 Kernel modules: ehci-hcd

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 22
 Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [130] Root Complex Link <?>
 Kernel driver in use: HDA Intel
 Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 2, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 41c9
 Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
 Memory behind bridge: f0300000-f03fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 3, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 41d1
 Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
 I/O behind bridge: 00003000-00003fff
 Memory behind bridge: f0200000-f02fffff
 Prefetchable memory behind bridge: 000000008c000000-000000008c0fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Suprise- LLActRep+ BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
   Slot # 5, PowerLimit 6.500000; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState-
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 41d9
 Capabilities: [90] Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [180] Root Complex Link <?>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 23
 Region 4: I/O ports at 1840 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 19
 Region 4: I/O ports at 1860 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at 1880 [size=32]
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 23
 Region 0: Memory at f0504400 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Kernel driver in use: ehci_hcd
 Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=05, subordinate=09, sec-latency=32
 I/O behind bridge: 00004000-00004fff
 Memory behind bridge: f0400000-f04fffff
 Prefetchable memory behind bridge: 0000000088000000-000000008bffffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Samsung Electronics Co Ltd Device [144d:c031]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information <?>
 Kernel modules: iTCO_wdt

00:1f.2 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller [8086:2828] (rev 03) (prog-if 80 [Master])
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 19
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at 18e0 [size=16]
 Region 5: I/O ports at 18d0 [size=16]
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: ata_piix
 Kernel modules: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 5
 Region 0: Memory at 8c100000 (32-bit, non-prefetchable) [size=256]
 Region 4: I/O ports at 1c00 [size=32]
 Kernel modules: i2c-i801

01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600M GS [10de:0425] (rev a1)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
 Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
 Region 3: Memory at cc000000 (64-bit, non-prefetchable) [size=32M]
 Region 5: I/O ports at 2000 [size=128]
 Capabilities: [60] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [78] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
   ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
   ClockPM- Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Virtual Channel <?>
 Capabilities: [128] Power Budgeting <?>
 Capabilities: [600] Vendor Specific Information <?>
 Kernel driver in use: nvidia
 Kernel modules: nvidiafb, nvidia

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
 Subsystem: Intel Corporation Device [8086:1101]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 218
 Region 0: Memory at f0300000 (64-bit, non-prefetchable) [size=8K]
 Capabilities: [c8] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 414a
 Capabilities: [e0] Express (v1) Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us
   ClockPM+ Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Advanced Error Reporting <?>
 Capabilities: [140] Device Serial Number 2d-af-6f-ff-ff-e8-13-00
 Kernel driver in use: iwlagn
 Kernel modules: iwlagn

04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 13)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 219
 Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=16K]
 Region 2: I/O ports at 3000 [size=256]
 [virtual] Expansion ROM at 8c000000 [disabled] [size=128K]
 Capabilities: [48] Power Management version 3
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [50] Vital Product Data <?>
 Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 413a
 Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited
   ClockPM+ Suprise- LLActRep- BwNot-
  LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100] Advanced Error Reporting <?>
 Kernel driver in use: sky2
 Kernel modules: sky2

05:09.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b4)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at f0400000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=05, secondary=06, subordinate=09, sec-latency=176
 Memory window 0: 88000000-8bfff000 (prefetchable)
 Memory window 1: 90000000-93fff000
 I/O window 0: 00004000-000040ff
 I/O window 1: 00004400-000044ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001
 Kernel driver in use: yenta_cardbus
 Kernel modules: yenta_socket

05:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 18)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at f0401000 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 Kernel driver in use: sdhci-pci
 Kernel modules: sdhci-pci

05:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 09)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 255
 Region 0: Memory at f0401400 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-
 Kernel driver in use: ricoh-mmc
 Kernel modules: ricoh_mmc

05:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 04)
 Subsystem: Samsung Electronics Co Ltd Device [144d:c031]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 255
 Region 0: Memory at f0401800 (32-bit, non-prefetchable) [size=256]
 Capabilities: [80] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

05:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff) (prog-if ff)
 !!! Unknown header type 7f

drunkenkilla@drunkenkilla-laptop:~$ cat /proc/version_signature
Ubuntu 2.6.27-7.15-generic

See original description
drunkenkilla (cyba2001)
description: updated
Revision history for this message
drunkenkilla (cyba2001) wrote : Re: Screen brightness doesn't work with Samsung R70 T7300 Despina

today i read in a forum, that yesterday came a big update for intrepid and now you can change the brightness. do someone use intrepid beta and can test it?

Revision history for this message
drunkenkilla (cyba2001) wrote :

ok it doesnt work...
i have tested some scripts and nothing works.
i were happy, when this problem were resolved.

Revision history for this message
Leann Ogasawara (leannogasawara) wrote :

Hi drunkenkilla,

You mentioned you tested some scripts? What about testing a LiveCD of the most recent Intrepid Ibex 8.10 release that came out last week?

Revision history for this message
drunkenkilla (cyba2001) wrote :

i have tested this with many live cd's, but all this doesn't work.

drunkenkilla (cyba2001)
description: updated
Revision history for this message
Leann Ogasawara (leannogasawara) wrote :

This seems like a similar issue to bug 212790 . I'm reassigning this to hal-info.

Revision history for this message
drunkenkilla (cyba2001) wrote :

hello, i tested even now the pre-release of fedora 10 and i could change the brightness with the applet from the panel. the fn-keys doesn't work too in fedora. the question is now, where the difference is between fedora and ubuntu.

Revision history for this message
drunkenkilla (cyba2001) wrote :
Download full text (28.1 KiB)

lshal:

[ 0.821018] bus: 01 index 3 mmio: [0, 0]
[ 0.821022] bus: 02 index 0 mmio: [0, 0]
[ 0.821025] bus: 02 index 1 mmio: [0, 0]
[ 0.821028] bus: 02 index 2 mmio: [0, 0]
[ 0.821031] bus: 02 index 3 mmio: [0, 0]
[ 0.821034] bus: 03 index 0 mmio: [0, 0]
[ 0.821037] bus: 03 index 1 mmio: [f0300000, f03fffff]
[ 0.821041] bus: 03 index 2 mmio: [0, 0]
[ 0.821044] bus: 03 index 3 mmio: [0, 0]
[ 0.821047] bus: 04 index 0 io port: [3000, 3fff]
[ 0.821051] bus: 04 index 1 mmio: [f0200000, f02fffff]
[ 0.821054] bus: 04 index 2 mmio: [8c000000, 8c0fffff]
[ 0.821058] bus: 04 index 3 mmio: [0, 0]
[ 0.821061] bus: 05 index 0 io port: [4000, 4fff]
[ 0.821064] bus: 05 index 1 mmio: [f0400000, f04fffff]
[ 0.821068] bus: 05 index 2 mmio: [88000000, 8bffffff]
[ 0.821071] bus: 05 index 3 io port: [0, ffff]
[ 0.821075] bus: 05 index 4 mmio: [0, ffffffff]
[ 0.821078] bus: 06 index 0 io port: [4000, 40ff]
[ 0.821081] bus: 06 index 1 io port: [4400, 44ff]
[ 0.821085] bus: 06 index 2 mmio: [88000000, 8bffffff]
[ 0.821088] bus: 06 index 3 mmio: [90000000, 93ffffff]
[ 0.821100] NET: Registered protocol family 2
[ 0.833076] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.833420] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.833823] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.834030] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.834035] TCP reno registered
[ 0.837095] NET: Registered protocol family 1
[ 0.837248] checking if image is initramfs... it is
[ 1.961298] Freeing initrd memory: 7930k freed
[ 1.961507] Simple Boot Flag at 0x36 set to 0x1
[ 1.962924] audit: initializing netlink socket (disabled)
[ 1.962944] type=2000 audit(1225911537.960:1): initialized
[ 1.972650] highmem bounce pool size: 64 pages
[ 1.972659] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.976334] VFS: Disk quotas dquot_6.5.1
[ 1.976484] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.976649] msgmni has been set to 1743
[ 1.976843] io scheduler noop registered
[ 1.976847] io scheduler anticipatory registered
[ 1.976851] io scheduler deadline registered
[ 1.976870] io scheduler cfq registered (default)
[ 1.977086] pci 0000:01:00.0: Boot video device
[ 1.977298] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.977355] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.977402] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.977474] pci_express 0000:00:01.0:pcie02: allocate port service
[ 1.977545] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.977702] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.977834] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.977959] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.978026] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.978092] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.978345] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.978478] pcieport-driver 0000:00:1c.1: fou...

Revision history for this message
drunkenkilla (cyba2001) wrote :

<match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" prefix_ncase="samsung">
 <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains_outof="SP55S;SQ45S70S">
          <append key="input.keymap.data" type="strlist">e002:displaytoggle</append> <!-- Fn+F4 CRT/LCD -->
          <append key="input.keymap.data" type="strlist">e003:battery</append> <!-- Fn+F2 battery icon -->
          <append key="input.keymap.data" type="strlist">e004:prog1</append> <!-- Fn+F5 backlight on/off -->
          <append key="input.keymap.data" type="strlist">e006:wlan</append> <!-- Fn+F9 Turn On/Off Wireless -->
          <append key="input.keymap.data" type="strlist">e008:brightnessup</append> <!-- Fn-Up Brightness up -->
          <append key="input.keymap.data" type="strlist">e009:brightnessdown</append> <!-- Fn-Down Brightness down -->
          <append key="input.keymap.data" type="strlist">e031:prog2</append> <!-- Fn+F7 run Samsung Magic Doctor (keypressed event is generated twice) -->
          <append key="input.keymap.data" type="strlist">e033:prog3</append> <!-- Fn+F8 switch power mode (battery/dynamic/performance) -->
          <append key="input.keymap.data" type="strlist">0074:prog1</append> <!-- User key -->
          <append key="input.keymap.data" type="strlist">0075:www</append> <!-- WWW key -->
          <append key="input.keymap.data" type="strlist">e077:f22</append> <!-- Fn+F10 Touchpad on -->
          <append key="input.keymap.data" type="strlist">0078:mail</append> <!-- Mail key -->
          <append key="input.keymap.data" type="strlist">e079:f22</append> <!-- Fn+F10 Touchpad off -->
          <append key="info.capabilities" type="strlist">input.keymap</append>
        </match>
 <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="SX20S">
   <append key="input.keymap.data" type="strlist">0074:mute</append>
   <append key="input.keymap.data" type="strlist">0075:mute</append>
   <append key="input.keymap.data" type="strlist">0077:f21</append> <!-- FIXME: Touchpad on -->
   <append key="input.keymap.data" type="strlist">0079:f21</append> <!-- FIXME: Touchpad off -->
        </match>
        <!-- Samsung Q1 Ultra -->
        <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" string="SQ1US">
          <append key="input.keymap.data" type="strlist">e054:menu</append> <!-- Menu: mute -->
          <append key="input.keymap.data" type="strlist">e058:f1</append> <!-- Up arrow: mute -->
          <append key="input.keymap.data" type="strlist">e059:f10</append> <!-- Right arrow: mute -->
          <append key="input.keymap.data" type="strlist">e056:f3</append> <!-- Down arrow: mute -->
          <append key="input.keymap.data" type="strlist">e057:f9</append> <!-- Left arrow: mute -->
          <append key="input.keymap.data" type="strlist">e064:f5</append> <!-- Shutter key: mute -->
          <append key="input.keymap.data" type="strlist">e06e:f11</append> <!-- UDF key: mute -->
          <append key="info.capabilities" type="strlist">input.keymap</append>
        </match>
      </match>

Revision history for this message
drunkenkilla (cyba2001) wrote :
Download full text (11.1 KiB)

<?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->

<deviceinfo version="0.2">
  <device>

    <!-- These are raw scancodes produced by the atkbd driver -->
    <match key="@input.originating_device:info.linux.driver" string="atkbd">

      <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" contains="BenQ">
        <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="Joybook R22">
          <append key="input.keymap.data" type="strlist">6e:wlan</append> <!-- Fn + F1 wireless network radio on and off. -->
          <!-- <append key="input.keymap.data" type="strlist">6d:brightnessdown</append> (Fn + F6 brightness down.) -->
          <!-- <append key="input.keymap.data" type="strlist">6d:brightnessup</append> (Fn + F7 brightness. up) -->
          <append key="info.capabilities" type="strlist">input.keymap</append>
        </match>
      </match>

      <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" prefix="FUJITSU">
        <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="AMILO Pro V3205">
   <append key="input.keymap.data" type="strlist">e074:f21</append> <!-- FIXME: silent-mode decrease CPU/GPU clock -->
          <append key="input.keymap.data" type="strlist">e077:switchvideomode</append> <!-- Fn+F3 switch screen -->
          <append key="info.capabilities" type="strlist">input.keymap</append>
        </match>
      </match>

      <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" prefix="MEDION">
        <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="FID2060">
          <append key="input.keymap.data" type="strlist">6b:channeldown</append> <!-- Thottle Down -->
          <append key="input.keymap.data" type="strlist">6d:channelup</append> <!-- Thottle Up -->
          <append key="info.capabilities" type="strlist">input.keymap</append>
        </match>
      </match>

      <match key="/org/freedesktop/Hal/devices/computer:system.hardware.vendor" prefix="MICRO-STAR">
        <match key="/org/freedesktop/Hal/devices/computer:system.hardware.product" contains="INFINITY">
          <append key="input.keymap.data" type="strlist">e020:mute</append> <!-- Fn-F9 Sound On/Off -->
          <append key="input.keymap.data" type="strlist">e02e:volumedown</append> <!-- Fn-F7 Volume down -->
          <append key="input.keymap.data" type="strlist">e030:volumeup</append> <!-- Fn-F8 Volume up -->
          <append key="input.keymap.data" type="strlist">e032:www</append> <!-- e button -->
          <append key="input.keymap.data" type="strlist">e05f:sleep</append> <!-- Fn-F12 Sleep -->
          <append key="input.keymap.data" type="strlist">e062:bluetooth</append> <!-- satellite dish2 -->
          <append key="input.keymap.data" type="strlist">e064:f22</append> <!-- Fn-F3 Touchpad disable -->
          <append key="input.keymap.data" type="strlist">e06c:email</append> <!-- envelope button -->
          <append key="input.keymap.data" type="strlist">e076:wlan</append> <!-- satellite dish1 -->
          <append key="input.keymap.data" type="strlist">e077:...

Chris Coulson (chrisccoulson)
Changed in hal-info:
assignee: nobody → chrisccoulson
importance: Undecided → Medium
status: New → Incomplete
Revision history for this message
drunkenkilla (cyba2001) wrote :

lshal.log

Revision history for this message
Chris Coulson (chrisccoulson) wrote :

After chatting on #ubuntu-bugs, it seems that the following scancodes correspond to the following keys:

  - e008 = FN-Up (brightnessup)
  - e009 = FN-Down (brightnessdown)

Changed in hal-info:
status: Incomplete → Triaged
Revision history for this message
Chris Coulson (chrisccoulson) wrote :

Are there any other hot keys that behave in a similar fashion? If so, I'll fix them all in one go

Changed in hal-info:
status: Triaged → In Progress
Revision history for this message
Chris Coulson (chrisccoulson) wrote :

I've uploaded a patched hal-info package in to my PPA, which can be found here: https://edge.launchpad.net/~chrisccoulson/+archive

Could you please test this package and provide feedback (you will need to reboot after installing it)

Revision history for this message
drunkenkilla (cyba2001) wrote :

fn-key+f5 should switch the backlight on/off

dmesg:
[ 2988.285954] atkbd.c: Use 'setkeycodes e004 <keycode>' to make it known.
[ 2988.634088] atkbd.c: Unknown key pressed (translated set 2, code 0x84 on isa0060/serio0).

tail -f /var/log/syslog:
Nov 5 22:48:30 drunkenkilla-laptop kernel: [ 2627.782770] atkbd.c: Unknown key pressed (translated set 2, code 0x84 on isa0060/serio0).
Nov 5 22:48:30 drunkenkilla-laptop kernel: [ 2627.782787] atkbd.c: Use 'setkeycodes e004 <keycode>' to make it known.

fn-key+f9 should switch wlan on/off

dmesg:
[ 2742.723922] atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known.
[ 2763.317060] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0).

tail -f /var/log/syslog:
Nov 5 22:56:07 drunkenkilla-laptop kernel: [ 3084.689167] atkbd.c: Unknown key pressed (translated set 2, code 0x86 on isa0060/serio0).
Nov 5 22:56:07 drunkenkilla-laptop kernel: [ 3084.689183] atkbd.c: Use 'setkeycodes e006 <keycode>' to make it known.

Revision history for this message
drunkenkilla (cyba2001) wrote :

my small workaround to change the brightness:

1. ctrl+alt+F1
2. type user und password
3. sudo -s
4. echo -n xx > /proc/acpi/video/NVID/LCD/brightness
5. ctrl+alt+F7

*4. f.e. xx = 30

Revision history for this message
rth. (rth.) wrote :

Hi Chris

I installed your patched hal-info and rebooted the pc. When I press the funktionkey the applet/picture popup and the statusbar is changing, but without taken effect on changing backlight. After I pressed the funktionkey the keyboard shows no reaktion for a while, accept changing the status of the popup.

Drunkenkillas workaround works fine.

Revision history for this message
Chris Coulson (chrisccoulson) wrote :

Groschensammler - I spoke to drunkenkilla on IRC, and he experiences the same behaviour as you. It seems the patch maps the brightness keys to the correct Xkeysyms, because you both see the brightness indicator on the screen, but something else is happening.

I assume that you are both using the NVIDIA proprietary driver? Would you mind trying my patch with the open source nv or vesa driver instead? I've read a lot about brightness keys not working with the proprietary NVIDIA driver.

Thanks

Revision history for this message
Chris Coulson (chrisccoulson) wrote :

I'll create another patch later with the additional non-functioning keys incorporated. Could you also both confirm that none of these non-working keys produces an ACPI event? To do this, run "acpi_listen" in a terminal and watch for any output as you press each of these broken keys.

Thanks

Revision history for this message
drunkenkilla (cyba2001) wrote :

i can change the brightness now with the fn-keys and the applet. But when i am changing it withe the fn-keys, the keyboard doesn't work correctly.

Revision history for this message
Chris Coulson (chrisccoulson) wrote :

drunkenkilla - was your last comment with or without the NVIDIA driver?

I have uploaded another version of hal-info with quirks for your WLAN key and backlight keys. Could you confirm whether these work? (you might need to wait a little while for the new version to build).

Could you also confirm whether any of the other keys work (if they are meant to do anything):

- Fn+F2 - Battery icon
- Fn+F7
- Fn+F8
- Fn+F10
- Mail key
- WWW key
- Mute and volume keys

Revision history for this message
drunkenkilla (cyba2001) wrote :

Hi Chris,
my last comment was with the nv driver. When i'm using FN-Key+brightness down, the brightness is changing but it's going completely down to 40%. It has 5 steps but it allways going down or up completely. The next bug is that the keyboard after using the FN-Key+brightness doesn't work correctly.

I have tested the other FN-Keys, which you have posted. The mute and volume keys are working correct. When i'm pressing the FN-Key+WWW-Key, the startpage of firefox is loading but after that nothing words even the touchpad. I had to reboot the system over tty1. The other keys don't work.

Revision history for this message
rth. (rth.) wrote :

Hi Chris + drunkenkilla

Tested your old release, it works on my laptop like drunkenkillas. acpi_listen gives no output for any keys, only "battery BAT1 00000080 00000001"

@drunkenkilla
if my keyboard doesn't react, i switch to tty1 and go back (strg+alt+f7) it works again

----------
Tested hal-info - 20081013-0ubuntu3+chrisccoulson3 + NVIDIA driver:

- Fn+F1 - Help --> it works!
- Fn+F2 - Battery icon --> no funktion
- Fn+F3 - euro-symbol --> doesn't insert the euro sign
- Fn+F4 - display switch --> not tested
- Fn+F5 - backlight on/off --> no funktion
- Fn+F6 - mute --> it works!
- Fn+F7 - Samsung MagicDoctor (Windows) --> no funktion
- Fn+F8 - easy speedup manager (Windows) --> no funktion
- Fn+F9 - WLAN on/off --> no funktion
- Fn+F10 - touchpad on/off --> it works!
- Fn+F11 - numlock --> it works!
- Fn+F12 - scroll lock --> no funktion
- WWW key --> nautilus or if open startpage in browser - it works! (no hanging)
- backlight keys --> indicator comes up without taken effect + no reaction of keyboard
- volume keys --> it works
- Mail key --> there isn't such a key

Revision history for this message
drunkenkilla (cyba2001) wrote :

Hi Chris,
are there some new infos?

Revision history for this message
drunkenkilla (cyba2001) wrote :

i have found a simmilar bug to our with the focus on the keyboard error.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/261721

Revision history for this message
drunkenkilla (cyba2001) wrote :

hello,

i installed even ubuntu 9.04 alpha 2 and i can change the brightness with the applet in the panel.
The change with the FN-Keys doesn't work, but it works with the applet in the panel ;)

Revision history for this message
Cyril Buquet (cyril11) wrote :

Hello,

I think that this other bug is important :
https://bugs.launchpad.net/bugs/295251

Samsung NC10
It discuss about kernel patch for Key Press / Key Release
It discuss about HAL quik

Revision history for this message
Chris Coulson (chrisccoulson) wrote :

Yeah, this is pretty much the same as bug 295251, it's just that it's a different Samsung model. The fixes will be the same though, so this should be a duplicate of it

Changed in hal-info:
status: In Progress → Invalid
Revision history for this message
pierre82 (mail-pierrehoening) wrote :

I wrote in Bug 295251:

"I come from 'Bug 219116 Multiple hotkeys don't work with Samsung R70 T7300 Despina' because it has the status of being duplicate of this one. And I'm using Ubuntu 9.04 where some fn-keys are not working. And when I compare 9.04 to 8.10 I lost the fn+f9 (wlan on/off) what was in 8.10.

Now working: fn+volume up/down, fn+f10 (touchpad), fn+www, fn+esc (standby), fn+f6 (sound), fn+f11, fn+-, fn+*, fn++, fn+enter

The rest: no function.

Please fix this and thx in advance."

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Bug attachments

Remote bug watches

Bug watches keep track of this bug in other bug trackers.