No sound in Dapper Beta

Sound: VT82C686 AC97 Audio Controller

Update 2: No sound now since I updated to kernel 2.6.15. See bug report #36089.

Update: I forgot I had another step to do. I opened the sound volume master in toolbar and found the speakers were turned off. I turned them on. Then went to /etc/modprobe.d/alsa-base and commented out the penultimate line. I have sound again. However, I have two questions.

1) Why are the speakers shut off in the master volume control in the tool bar?

2) Why to have sound does the penultimate line in /etc/modprobe.d/alsa-base need to be commented out?
 (Look below to see what I did.)
_______________________________________________________________
I had sound with Dapper Alpha after I commented the penultimate line in /ect/modprobe.d/alsa-base. (See Below)

# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 modprobe --ignore-install saa7134 $CMDLINE_OPTS && { modprobe -Qb saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options snd-bt87x index=-2
options snd-atiixp-modem index=-2
# options snd-intel8x0m index=-2
options snd-via82xx-modem index=-0

Thread: http://ubuntuforums.org/showthread.php?t=160576

However, in Dapper Beta, I have no sound at all.

dmesg

[4294667.296000] Linux version 2.6.15-21-386 (buildd@rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Fri Apr 21 16:43:33 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[4294667.296000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 511MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 131056
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 126960 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 VIA694 ) @ 0x000f6d20
[4294667.296000] ACPI: RSDT (v001 VIA694 AWRDACPI 0x30302e32 AWRD 0x00000000) @ 0x1fff3000
[4294667.296000] ACPI: FADT (v002 VIA694 AWRDACPI 0x30302e32 AWRD 0x00000000) @ 0x1fff3040
[4294667.296000] ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01402000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 1298.987 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294668.370000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294668.374000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.423000] Memory: 509112k/524224k available (1974k kernel code, 14584k reserved, 604k data, 288k init, 0k highmem)
[4294668.423000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294668.484000] Calibrating delay using timer specific routine.. 2598.32 BogoMIPS (lpj=1299162)
[4294668.484000] Security Framework v1.0.0 initialized
[4294668.484000] SELinux: Disabled at boot.
[4294668.484000] Mount-cache hash table entries: 512
[4294668.484000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.484000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294668.484000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294668.484000] CPU: L2 cache: 256K
[4294668.484000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[4294668.484000] mtrr: v2.0 (20020519)
[4294668.484000] CPU: Intel(R) Celeron(TM) CPU 1300MHz stepping 01
[4294668.484000] Enabling fast FPU save and restore... done.
[4294668.484000] Enabling unmasked SIMD FPU exception support... done.
[4294668.484000] Checking 'hlt' instruction... OK.
[4294668.488000] checking if image is initramfs... it is
[4294669.671000] Freeing initrd memory: 6395k freed
[4294669.698000] ACPI: Looking for DSDT ... not found!
[4294669.700000] ACPI: setting ELCR to 0200 (from 1e20)
[4294669.748000] NET: Registered protocol family 16
[4294669.748000] EISA bus registered
[4294669.748000] ACPI: bus type pci registered
[4294669.765000] PCI: PCI BIOS revision 2.10 entry at 0xfb290, last bus=1
[4294669.765000] PCI: Using configuration type 1
[4294669.765000] ACPI: Subsystem revision 20051216
[4294669.775000] ACPI: Interpreter enabled
[4294669.775000] ACPI: Using PIC for interrupt routing
[4294669.776000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294669.776000] PCI: Probing PCI hardware (bus 00)
[4294669.776000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294669.778000] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
[4294669.778000] PCI quirk: region 5000-500f claimed by vt82c686 SMB
[4294669.778000] Boot video device is 0000:01:00.0
[4294669.778000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294669.797000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[4294669.798000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294669.798000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[4294669.799000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[4294669.802000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294669.802000] pnp: PnP ACPI init
[4294669.805000] pnp: PnP ACPI: found 11 devices
[4294669.805000] PnPBIOS: Disabled by ACPI PNP
[4294669.805000] PCI: Using ACPI for IRQ routing
[4294669.805000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294669.854000] PCI: Bridge: 0000:00:01.0
[4294669.854000] IO window: disabled.
[4294669.854000] MEM window: e6000000-e7ffffff
[4294669.854000] PREFETCH window: e4000000-e5ffffff
[4294669.854000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294669.855000] audit: initializing netlink socket (disabled)
[4294669.855000] audit(1145870714.854:1): initialized
[4294669.855000] VFS: Disk quotas dquot_6.5.1
[4294669.855000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294669.855000] Initializing Cryptographic API
[4294669.855000] io scheduler noop registered
[4294669.855000] io scheduler anticipatory registered
[4294669.855000] io scheduler deadline registered
[4294669.855000] io scheduler cfq registered
[4294669.855000] PCI: Disabling Via external APIC routing
[4294669.856000] isapnp: Scanning for PnP cards...
[4294670.213000] isapnp: No Plug & Play device found
[4294670.241000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[4294670.241000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[4294670.241000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.242000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.242000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294670.242000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.242000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294670.247000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.247000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294670.248000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294670.248000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.248000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.248000] mice: PS/2 mouse device common for all mice
[4294670.248000] EISA: Probing bus 0 at eisa.0
[4294670.248000] Cannot allocate resource for EISA slot 4
[4294670.248000] Cannot allocate resource for EISA slot 5
[4294670.248000] Cannot allocate resource for EISA slot 6
[4294670.248000] EISA: Detected 0 cards.
[4294670.248000] NET: Registered protocol family 2
[4294670.258000] IP route cache hash table entries: 8192 (order: 3, 32768 bytes)[4294670.258000] TCP established hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.258000] TCP bind hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.259000] TCP: Hash tables configured (established 32768 bind 32768)
[4294670.259000] TCP reno registered
[4294670.259000] TCP bic registered
[4294670.259000] NET: Registered protocol family 1
[4294670.259000] NET: Registered protocol family 8
[4294670.259000] NET: Registered protocol family 20
[4294670.259000] Using IPI Shortcut mode
[4294670.260000] ACPI wakeup devices:
[4294670.260000] PCI0 USB0 USB1 MODM UAR1 UAR2
[4294670.260000] ACPI: (supports S0 S1 S4 S5)
[4294670.260000] Freeing unused kernel memory: 288k freed
[4294670.367000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.387000] vga16fb: initializing
[4294670.387000] vga16fb: mapped to 0xc00a0000
[4294670.510000] Console: switching to colour frame buffer device 80x25
[4294670.510000] fb0: VGA16 VGA frame buffer device
[4294671.534000] Capability LSM initialized
[4294671.686000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294671.686000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294672.629000] VP_IDE: IDE controller at PCI slot 0000:00:07.1
[4294672.629000] PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
[4294672.629000] VP_IDE: chipset revision 6
[4294672.629000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.629000] VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
[4294672.629000] ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
[4294672.629000] ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:DMA
[4294672.629000] Probing IDE interface ide0...
[4294673.015000] hda: SAMSUNG SV2001H, ATA DISK drive
[4294673.627000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.627000] Probing IDE interface ide1...
[4294674.421000] hdc: CRD-8520B, ATAPI CD/DVD-ROM drive
[4294675.135000] hdd: Hewlett-Packard CD-Writer Plus 9300, ATAPI CD/DVD-ROM drive
[4294675.187000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.199000] hda: max request size: 128KiB
[4294675.222000] hda: 39179952 sectors (20060 MB) w/1945KiB Cache, CHS=38869/16/63, UDMA(100)
[4294675.223000] hda: cache flushes supported
[4294675.224000] hda: hda1 hda2 hda3
[4294675.258000] hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
[4294675.258000] Uniform CD-ROM driver Revision: 3.20
[4294675.260000] hdd: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, UDMA(33)
[4294675.694000] usbcore: registered new driver usbfs
[4294675.696000] usbcore: registered new driver hub
[4294675.700000] USB Universal Host Controller Interface driver v2.3
[4294675.701000] **** SET: Misaligned resource pointer: dfeeb3e2 Type 07 Len 0
[4294675.702000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[4294675.702000] PCI: setting IRQ 12 as level-triggered
[4294675.702000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
[4294675.702000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[4294675.702000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[4294675.702000] uhci_hcd 0000:00:07.2: irq 12, io base 0x0000c400
[4294675.703000] hub 1-0:1.0: USB hub found
[4294675.703000] hub 1-0:1.0: 2 ports detected
[4294675.804000] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
[4294675.804000] uhci_hcd 0000:00:07.3: UHCI Host Controller
[4294675.804000] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[4294675.804000] uhci_hcd 0000:00:07.3: irq 12, io base 0x0000c800
[4294675.804000] hub 2-0:1.0: USB hub found
[4294675.804000] hub 2-0:1.0: 2 ports detected
[4294676.010000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[4294676.055000] Attempting manual resume
[4294676.121000] EXT3-fs: mounted filesystem with ordered data mode.
[4294676.125000] kjournald starting. Commit interval 5 seconds
[4294689.348000] Linux agpgart interface v0.101 (c) Dave Jones
[4294689.353000] agpgart: Detected VIA Apollo Pro 133 chipset
[4294689.357000] agpgart: AGP aperture is 64M @ 0xe0000000
[4294689.435000] parport_pc: VIA 686A/8231 detected
[4294689.435000] parport_pc: probing current configuration
[4294689.435000] parport_pc: Current parallel port base: 0x378
[4294689.436000] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[4294689.518000] parport_pc: VIA parallel port: io=0x378, irq=7
[4294689.978000] 8139too Fast Ethernet driver 0.9.27
[4294689.978000] **** SET: Misaligned resource pointer: dfbd7302 Type 07 Len 0
[4294689.979000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[4294689.979000] PCI: setting IRQ 11 as level-triggered
[4294689.979000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[4294689.980000] eth0: RealTek RTL8139 at 0xe0886000, 00:02:2a:c9:d0:37, IRQ 11
[4294689.980000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[4294690.024000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294690.115000] input: PC Speaker as /class/input/input1
[4294690.135000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294690.149000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294690.890000] nvidia: module license 'NVIDIA' taints kernel.
[4294690.906000] NVRM: The NVIDIA RIVA TNT2 Model 64/Model 64 Pro GPU installed in this system is
[4294690.906000] NVRM: supported through the NVIDIA Legacy drivers. Please
[4294690.906000] NVRM: visit http://www.nvidia.com/object/unix.html for more
[4294690.906000] NVRM: information. The 1.0-8756 NVIDIA driver will ignore
[4294690.906000] NVRM: this GPU. Continuing probe...
[4294690.907000] NVRM: No NVIDIA graphics adapter found!
[4294690.968000] Real Time Clock Driver v1.12
[4294691.129000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
[4294691.250000] **** SET: Misaligned resource pointer: dc365722 Type 07 Len 0
[4294691.251000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[4294691.251000] PCI: setting IRQ 5 as level-triggered
[4294691.251000] ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[4294691.251000] PCI: Setting latency timer of device 0000:00:07.5 to 64
[4294691.312000] Floppy drive(s): fd0 is 1.44M
[4294691.326000] FDC 0 is a post-1991 82077
[4294691.629000] usbcore: registered new driver hiddev
[4294691.659000] input: Logitech USB Mouse as /class/input/input2
[4294691.659000] input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.2-1
[4294691.659000] usbcore: registered new driver usbhid
[4294691.659000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294691.781000] **** SET: Misaligned resource pointer: dae392c2 Type 07 Len 0
[4294691.782000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[4294691.782000] PCI: setting IRQ 10 as level-triggered
[4294691.782000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
[4294691.783000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7174 Tue Mar 22 06:44:39 PST 2005
[4294692.344000] ts: Compaq touchscreen protocol output
[4294693.001000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294693.799000] lp0: using parport0 (interrupt-driven).
[4294693.900000] Adding 1028152k swap on /dev/hda3. Priority:-1 extents:1 across:1028152k
[4294694.061000] NET: Registered protocol family 17
[4294694.156000] EXT3 FS on hda1, internal journal
[4294694.359000] NET: Registered protocol family 10
[4294694.359000] lo: Disabled Privacy Extensions
[4294694.359000] IPv6 over IPv4 tunneling driver
[4294694.492000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294694.492000] md: bitmap version 4.39
[4294695.164000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294695.460000] cdrom: open failed.
[4294695.926000] cdrom: open failed.
[4294695.931000] cdrom: open failed.
[4294699.435000] ReiserFS: hda2: found reiserfs format "3.6" with standard journal
[4294700.261000] ReiserFS: hda2: using ordered data mode
[4294700.279000] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[4294700.284000] ReiserFS: hda2: checking transaction log (hda2)
[4294700.335000] ReiserFS: hda2: Using r5 hash to sort names
[4294702.041000] ACPI: Power Button (FF) [PWRF]
[4294702.042000] ACPI: Power Button (CM) [PWRB]
[4294702.212000] ibm_acpi: ec object not found
[4294702.249000] pcc_acpi: loading...
[4294704.878000] eth0: no IPv6 routers present
[4294709.599000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294709.600000] apm: overridden by ACPI.
[4294713.838000] ip_tables: (C) 2000-2002 Netfilter core team
[4294713.978000] Netfilter messages via NETLINK v0.30.
[4294713.996000] ip_conntrack version 2.4 (4095 buckets, 32760 max) - 232 bytes per conntrack
[4294716.991000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294716.991000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294716.991000] ide: failed opcode was: 0xec
[4294717.003000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294717.003000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294717.003000] ide: failed opcode was: 0xec
[4294717.038000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294717.038000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294717.038000] ide: failed opcode was: 0xec
[4294717.050000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294717.050000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294717.050000] ide: failed opcode was: 0xec
[4294717.361000] Bluetooth: Core ver 2.8
[4294717.361000] NET: Registered protocol family 31
[4294717.361000] Bluetooth: HCI device and connection manager initialized
[4294717.361000] Bluetooth: HCI socket layer initialized
[4294717.413000] Bluetooth: L2CAP ver 2.8
[4294717.413000] Bluetooth: L2CAP socket layer initialized
[4294717.418000] Bluetooth: RFCOMM socket layer initialized
[4294717.418000] Bluetooth: RFCOMM TTY layer initialized
[4294717.418000] Bluetooth: RFCOMM ver 1.7

lspci -vvn

sef@jokat1:~$ lspci -vvn
0000:00:00.0 0600: 1106:0691 (rev c4)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 8
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: <available only to root>

0000:00:01.0 0604: 1106:8598
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Memory behind bridge: e6000000-e7ffffff
        Prefetchable memory behind bridge: e4000000-e5ffffff
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
        Capabilities: <available only to root>

0000:00:07.0 0601: 1106:0686 (rev 40)
        Subsystem: 1106:0000
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: <available only to root>

0000:00:07.1 0101: 1106:0571 (rev 06) (prog-if 8a [Master SecP PriP])
        Subsystem: 1106:0571
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32
        Region 4: I/O ports at c000 [size=16]
        Capabilities: <available only to root>

0000:00:07.2 0c03: 1106:3038 (rev 1a)
        Subsystem: 0925:1234
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin D routed to IRQ 12
        Region 4: I/O ports at c400 [size=32]
        Capabilities: <available only to root>

0000:00:07.3 0c03: 1106:3038 (rev 1a)
        Subsystem: 0925:1234
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32, Cache Line Size: 0x08 (32 bytes)
        Interrupt: pin D routed to IRQ 12
        Region 4: I/O ports at c800 [size=32]
        Capabilities: <available only to root>

0000:00:07.4 0680: 1106:3057 (rev 40)
        Subsystem: 1106:3057
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin ? routed to IRQ 9
        Capabilities: <available only to root>

0000:00:07.5 0401: 1106:3058 (rev 50)
        Subsystem: 1106:3058
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin C routed to IRQ 5
        Region 0: I/O ports at cc00 [size=256]
        Region 1: I/O ports at d000 [size=4]
        Region 2: I/O ports at d400 [size=4]
        Capabilities: <available only to root>

0000:00:0a.0 0200: 10ec:8139 (rev 10)
        Subsystem: 10ec:8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at dc00 [size=256]
        Region 1: Memory at e9002000 (32-bit, non-prefetchable) [size=256] Expansion ROM at 30000000 [disabled] [size=64K]
        Capabilities: <available only to root>

0000:00:0c.0 0401: 125d:199a (rev 10)
        Subsystem: 125d:1998
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (500ns min, 6000ns max)
        Interrupt: pin A routed to IRQ 12
        Region 0: I/O ports at e000 [size=256]
        Region 1: Memory at e9000000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <available only to root>

0000:01:00.0 0300: 10de:002d (rev 15)
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 32 (1250ns min, 250ns max)
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e4000000 (32-bit, prefetchable) [size=32M]
        Expansion ROM at e7000000 [disabled] [size=64K]
        Capabilities: <available only to root>