Bug #79104 “Internet via DHCP lost after suspend on Toshiba lapt...” : Bugs : Ubuntu

Willem Kan (wrkan-deactivatedaccount) on 2007-01-14

description:

updated

Revision history for this message

Willem Kan (wrkan-deactivatedaccount) wrote on 2007-01-15:

#1

ACPID Edit (2.5 KiB, text/plain)

Please find attached files if that may help.

Revision history for this message

Willem Kan (wrkan-deactivatedaccount) wrote on 2007-01-15:

#2

syslog Edit (147.7 KiB, text/plain)

Revision history for this message

Willem Kan (wrkan-deactivatedaccount) wrote on 2007-01-18:

#3

I'm confused: nothings happens with this bug report (no reaction at all). Did I do something wrong while filing it?
Thanks

Revision history for this message

Stéphane Graber (stgraber) wrote on 2007-01-29:

#4

What's your wireless card driver ?
Can you post the result of :
ifconfig -a
iwconfig
and dmesg

Revision history for this message

Willem Kan (wrkan-deactivatedaccount) wrote on 2007-02-03:

#5

Download full text (40.1 KiB)

Yes, here is info:

w@Laptop:~$ ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:18:DE:4E:AB:06
          inet addr:192.168.2.4 Bcast:192.168.2.255 Mask:255.255.255.0
          inet6 addr: fe80::218:deff:fe4e:ab06/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:672 errors:0 dropped:338 overruns:0 frame:0
          TX packets:669 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:479258 (468.0 KiB) TX bytes:150489 (146.9 KiB)
          Interrupt:16 Memory:d6000000-d6000fff

lo Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1550 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1550 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:120995 (118.1 KiB) TX bytes:120995 (118.1 KiB)

w@Laptop:~$
w@Laptop:~$ iwconfig
lo no wireless extensions.

eth0 IEEE 802.11g ESSID:"SOMETHING"
          Mode:Managed Frequency:2.412 GHz Access Point: 00:01:E3:D2:4C:95
          Bit Rate:54 Mb/s Tx-Power:15 dBm
          Retry limit:15 RTS thr:off Fragment thr:off
          Power Management:off
          Link Quality=72/100 Signal level=-62 dBm Noise level=-63 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:0 Invalid misc:338 Missed beacon:0

w@Laptop:~$ dmesg
[ 0.000000] Linux version 2.6.20-6-generic (root@palmer) (gcc version 4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31 20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f580000 end: 000000001f680000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000001f680000 size: 0000000000080000 end: 000000001f700000 type: 4
[ 0.000000] copy_e820_map() start: 000000001f700000 size: 0000000000900000 end: 0000000020000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 00000...

Yes, here is info:

w@Laptop:~$ ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:18:DE:4E:AB:06  
          inet addr:192.168.2.4  Bcast:192.168.2.255  Mask:255.255.255.0
          inet6 addr: fe80::218:deff:fe4e:ab06/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:672 errors:0 dropped:338 overruns:0 frame:0
          TX packets:669 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:479258 (468.0 KiB)  TX bytes:150489 (146.9 KiB)
          Interrupt:16 Memory:d6000000-d6000fff

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1550 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1550 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:120995 (118.1 KiB)  TX bytes:120995 (118.1 KiB)

w@Laptop:~$ 
w@Laptop:~$ iwconfig
lo        no wireless extensions.

eth0      IEEE 802.11g  ESSID:"SOMETHING"  
          Mode:Managed  Frequency:2.412 GHz  Access Point: 00:01:E3:D2:4C:95   
          Bit Rate:54 Mb/s   Tx-Power:15 dBm   
          Retry limit:15   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=72/100  Signal level=-62 dBm  Noise level=-63 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:338   Missed beacon:0

w@Laptop:~$ dmesg
[    0.000000] Linux version 2.6.20-6-generic (root@palmer) (gcc version 4.1.2 20070106 (prerelease) (Ubuntu 4.1.1-21ubuntu7)) #2 SMP Wed Jan 31 20:53:39 UTC 2007 (Ubuntu 2.6.20-6.11-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000001f580000 end: 000000001f680000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000001f680000 size: 0000000000080000 end: 000000001f700000 type: 4
[    0.000000] copy_e820_map() start: 000000001f700000 size: 0000000000900000 end: 0000000020000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[    0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001f680000 (usable)
[    0.000000]  BIOS-e820: 000000001f680000 - 000000001f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 502MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7670
[    0.000000] Entering add_active_range(0, 0, 128640) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   128640
[    0.000000]   HighMem    128640 ->   128640
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   128640
[    0.000000] On node 0 totalpages: 128640
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 973 pages used for memmap
[    0.000000]   Normal zone: 123571 pages, LIFO batch:31
[    0.000000]   HighMem zone: 0 pages used for memmap
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 TOSCPL                                ) @ 0x000f75e0
[    0.000000] ACPI: RSDT (v001 TOSCPL Capell00 0x06040000  LTP 0x00000000) @ 0x1f681b68
[    0.000000] ACPI: FADT (v001 TOSCPL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688dfc
[    0.000000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688e70
[    0.000000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688ed8
[    0.000000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x1f688f10
[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1f688fd8
[    0.000000] ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x1f688f7e
[    0.000000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x1f682b3c
[    0.000000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x1f6824aa
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20050624) @ 0x1f68228a
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Cst 0x00003001 INTL 0x20050624) @ 0x1f6820ae
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x1f681bb8
[    0.000000] ACPI: DSDT (v001 TOSCPL CALISTGA 0x06040000 INTL 0x20050624) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:14 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
[    0.000000] Detected 1862.063 MHz processor.
[   21.721992] Built 1 zonelists.  Total pages: 127635
[   21.721996] Kernel command line: root=UUID=8ce65f0e-3c7f-43ac-b263-978e016a60ea ro quiet splash
[   21.722143] mapped APIC to ffffd000 (fee00000)
[   21.722145] mapped IOAPIC to ffffc000 (fec00000)
[   21.722148] Enabling fast FPU save and restore... done.
[   21.722151] Enabling unmasked SIMD FPU exception support... done.
[   21.722159] Initializing CPU#0
[   21.722234] PID hash table entries: 2048 (order: 11, 8192 bytes)
[   21.723956] Console: colour VGA+ 80x25
[   21.724131] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[   21.724316] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[   21.734982] Memory: 499300k/514560k available (1975k kernel code, 14784k reserved, 878k data, 324k init, 0k highmem)
[   21.734991] virtual kernel memory layout:
[   21.734992]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   21.734993]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   21.734994]     vmalloc : 0xe0000000 - 0xff7fe000   ( 503 MB)
[   21.734996]     lowmem  : 0xc0000000 - 0xdf680000   ( 502 MB)
[   21.734997]       .init : 0xc03cf000 - 0xc0420000   ( 324 kB)
[   21.734998]       .data : 0xc02edd14 - 0xc03c96d4   ( 878 kB)
[   21.734999]       .text : 0xc0100000 - 0xc02edd14   (1975 kB)
[   21.735002] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   21.735161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   21.735166] hpet0: 3 64-bit timers, 14318180 Hz
[   21.736170] Using HPET for base-timer
[   21.815028] Calibrating delay using timer specific routine.. 3728.20 BogoMIPS (lpj=7456405)
[   21.815066] Security Framework v1.0.0 initialized
[   21.815074] SELinux:  Disabled at boot.
[   21.815089] Mount-cache hash table entries: 512
[   21.815207] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[   21.815214] monitor/mwait feature present.
[   21.815216] using mwait in idle threads.
[   21.815220] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.815222] CPU: L2 cache: 2048K
[   21.815225] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000
[   21.815242] Checking 'hlt' instruction... OK.
[   21.831094] SMP alternatives: switching to UP code
[   21.831265] Freeing SMP alternatives: 11k freed
[   21.831341] ACPI: Core revision 20060707
[   21.854828] CPU0: Intel Genuine Intel(R) CPU           T1350  @ 1.86GHz stepping 08
[   21.854852] Total of 1 processors activated (3728.20 BogoMIPS).
[   21.855056] ENABLING IO-APIC IRQs
[   21.855254] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   22.002733] Brought up 1 CPUs
[   22.002929] Booting paravirtualized kernel on bare hardware
[   22.002975] NET: Registered protocol family 16
[   22.003043] EISA bus registered
[   22.003047] ACPI: bus type pci registered
[   22.003055] PCI: Using MMCONFIG
[   22.003773] Setting up standard PCI resources
[   22.011911] ACPI: Interpreter enabled
[   22.011913] ACPI: Using IOAPIC for interrupt routing
[   22.012319] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   22.012324] PCI: Probing PCI hardware (bus 00)
[   22.012963] Boot video device is 0000:00:02.0
[   22.013446] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[   22.013450] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[   22.014382] PCI: Transparent bridge - 0000:00:1e.0
[   22.014445] PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses')
[   22.014448] Please report the result to linux-kernel to fix this permanently
[   22.014489] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   22.020954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[   22.021184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[   22.022103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[   22.022659] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[   22.022889] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[   22.023112] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   22.023333] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   22.023552] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   22.023771] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[   22.023990] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[   22.024210] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[   22.075076] Linux Plug and Play Support v0.97 (c) Adam Belay
[   22.075088] pnp: PnP ACPI init
[   22.102650] pnp: PnP ACPI: found 10 devices
[   22.102653] PnPBIOS: Disabled by ACPI PNP
[   22.102684] PCI: Using ACPI for IRQ routing
[   22.102687] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   22.102971] pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved
[   22.102974] pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved
[   22.102977] pnp: 00:01: ioport range 0xff00-0xff7f has been reserved
[   22.103180] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[   22.103185] PCI: Bridge: 0000:00:1c.0
[   22.103188]   IO window: 2000-2fff
[   22.103194]   MEM window: d4000000-d5ffffff
[   22.103198]   PREFETCH window: d0000000-d1ffffff
[   22.103203] PCI: Bridge: 0000:00:1c.1
[   22.103206]   IO window: 3000-3fff
[   22.103211]   MEM window: d6000000-d7ffffff
[   22.103215]   PREFETCH window: d2000000-d3ffffff
[   22.103226] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[   22.103228]   IO window: 00004400-000044ff
[   22.103233]   IO window: 00004800-000048ff
[   22.103238]   PREFETCH window: 30000000-33ffffff
[   22.103242]   MEM window: 34000000-37ffffff
[   22.103247] PCI: Bridge: 0000:00:1e.0
[   22.103250]   IO window: 4000-4fff
[   22.103255]   MEM window: d8000000-d80fffff
[   22.103259]   PREFETCH window: 30000000-33ffffff
[   22.103282] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
[   22.103288] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.103306] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
[   22.103311] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   22.103323] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   22.103337] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 17
[   22.103358] NET: Registered protocol family 2
[   22.138508] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[   22.138569] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[   22.138657] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[   22.138701] TCP: Hash tables configured (established 16384 bind 8192)
[   22.138704] TCP reno registered
[   22.150542] checking if image is initramfs... it is
[   22.730204] Freeing initrd memory: 6697k freed
[   22.730607] Simple Boot Flag at 0x36 set to 0x1
[   22.730885] audit: initializing netlink socket (disabled)
[   22.730898] audit(1170510450.064:1): initialized
[   22.730998] VFS: Disk quotas dquot_6.5.1
[   22.731019] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.731061] io scheduler noop registered
[   22.731063] io scheduler anticipatory registered
[   22.731065] io scheduler deadline registered
[   22.731072] io scheduler cfq registered (default)
[   22.731456] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.731503] assign_interrupt_mode Found MSI capability
[   22.731547] Allocate Port Service[0000:00:1c.0:pcie00]
[   22.731576] Allocate Port Service[0000:00:1c.0:pcie02]
[   22.731602] Allocate Port Service[0000:00:1c.0:pcie03]
[   22.731700] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[   22.731747] assign_interrupt_mode Found MSI capability
[   22.731780] Allocate Port Service[0000:00:1c.1:pcie00]
[   22.731807] Allocate Port Service[0000:00:1c.1:pcie02]
[   22.731833] Allocate Port Service[0000:00:1c.1:pcie03]
[   22.732143] isapnp: Scanning for PnP cards...
[   23.085813] isapnp: No Plug & Play device found
[   23.106391] Real Time Clock Driver v1.12ac
[   23.106441] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   23.107009] mice: PS/2 mouse device common for all mice
[   23.107476] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   23.107638] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   23.107642] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   23.107922] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[   23.108147] i8042.c: Detected active multiplexing controller, rev 1.1.
[   23.108222] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.108226] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   23.108228] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   23.108230] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   23.108232] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   23.108326] EISA: Probing bus 0 at eisa.0
[   23.108335] Cannot allocate resource for EISA slot 1
[   23.108337] Cannot allocate resource for EISA slot 2
[   23.108339] Cannot allocate resource for EISA slot 3
[   23.108341] Cannot allocate resource for EISA slot 4
[   23.108358] EISA: Detected 0 cards.
[   23.138477] TCP cubic registered
[   23.138485] NET: Registered protocol family 1
[   23.138490] NET: Registered protocol family 8
[   23.138492] NET: Registered protocol family 20
[   23.138522] Using IPI No-Shortcut mode
[   23.138585] ACPI: (supports S0 S3 S4 S5)
[   23.138800] Freeing unused kernel memory: 324k freed
[   23.140498] input: AT Translated Set 2 keyboard as /class/input/input0
[   23.140747] Time: tsc clocksource has been installed.
[   24.323423] Capability LSM initialized
[   24.349018] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   24.349028] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[   24.640630] usbcore: registered new interface driver usbfs
[   24.640649] usbcore: registered new interface driver hub
[   24.640666] usbcore: registered new device driver usb
[   24.641353] USB Universal Host Controller Interface driver v3.0
[   24.641398] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[   24.641407] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   24.641411] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   24.641548] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   24.641579] uhci_hcd 0000:00:1d.0: irq 18, io base 0x00001820
[   24.641659] usb usb1: configuration #1 chosen from 1 choice
[   24.641678] hub 1-0:1.0: USB hub found
[   24.641682] hub 1-0:1.0: 2 ports detected
[   24.697574] ieee1394: Initialized config rom entry `ip1394'
[   24.742130] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   24.742142] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   24.742146] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   24.742164] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   24.742196] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[   24.742277] usb usb2: configuration #1 chosen from 1 choice
[   24.742299] hub 2-0:1.0: USB hub found
[   24.742304] hub 2-0:1.0: 2 ports detected
[   24.845957] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[   24.845968] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   24.845972] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   24.845994] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   24.846028] uhci_hcd 0000:00:1d.2: irq 20, io base 0x00001860
[   24.846102] usb usb3: configuration #1 chosen from 1 choice
[   24.846122] hub 3-0:1.0: USB hub found
[   24.846126] hub 3-0:1.0: 2 ports detected
[    3.080000] Time: hpet clocksource has been installed.
[    3.104000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[    3.104000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.104000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.104000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.104000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[    3.104000] usb usb4: configuration #1 chosen from 1 choice
[    3.104000] hub 4-0:1.0: USB hub found
[    3.104000] hub 4-0:1.0: 2 ports detected
[    3.208000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> IRQ 21
[    3.260000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[d8001000-d80017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.264000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[    3.264000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.264000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.264000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.264000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.264000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.264000] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xd8444000
[    3.268000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.268000] usb usb5: configuration #1 chosen from 1 choice
[    3.268000] hub 5-0:1.0: USB hub found
[    3.268000] hub 5-0:1.0: 8 ports detected
[    3.376000] SCSI subsystem initialized
[    3.380000] libata version 2.00 loaded.
[    3.380000] ata_piix 0000:00:1f.2: version 2.00ac7
[    3.380000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    3.536000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    3.536000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.536000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[    3.536000] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[    3.536000] scsi0 : ata_piix
[    3.700000] ata1.00: ATA-7, max UDMA/100, 117210240 sectors: LBA48 NCQ (depth 0/32)
[    3.700000] ata1.00: ata1: dev 0 multi count 16
[    3.708000] ata1.00: configured for UDMA/100
[    3.708000] scsi1 : ata_piix
[    4.028000] ata2.00: ATAPI, max UDMA/33
[    4.192000] ata2.00: configured for UDMA/33
[    4.192000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
[    4.192000] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.70 PQ: 0 ANSI: 5
[    4.208000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[    4.208000] sda: Write Protect is off
[    4.208000] sda: Mode Sense: 00 3a 00 00
[    4.208000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.208000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[    4.208000] sda: Write Protect is off
[    4.208000] sda: Mode Sense: 00 3a 00 00
[    4.208000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.208000]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    4.300000] sd 0:0:0:0: Attached scsi disk sda
[    4.304000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.304000] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[    4.312000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.312000] Uniform CD-ROM driver Revision: 3.20
[    4.312000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.536000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023f6a994001b8]
[    4.548000] Attempting manual resume
[    4.588000] kjournald starting.  Commit interval 5 seconds
[    4.588000] EXT3-fs: mounted filesystem with ordered data mode.
[   13.316000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.316000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.600000] intel_rng: FWH not detected
[   14.084000] Linux agpgart interface v0.101 (c) Dave Jones
[   14.088000] agpgart: Detected an Intel 945GM Chipset.
[   14.088000] agpgart: Detected 7932K stolen memory.
[   14.108000] agpgart: AGP aperture is 256M @ 0xc0000000
[   14.128000] iTCO_vendor_support: vendor-support=0
[   14.140000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   14.140000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   14.140000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   14.204000] Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff01]
[   14.204000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   14.204000] Yenta: Routing CardBus interrupts to PCI
[   14.204000] Yenta TI: socket 0000:06:04.0, mfunc 0x89501212, devctl 0x44
[   14.224000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[   14.224000] sdhci: Copyright(c) Pierre Ossman
[   14.412000] input: PC Speaker as /class/input/input1
[   14.436000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
[   14.436000] Socket status: 30000006
[   14.436000] Yenta: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[   14.436000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   14.436000] cs: IO port probe 0x4000-0x4fff: clean.
[   14.436000] pcmcia: parent PCI bridge Memory window: 0xd8000000 - 0xd80fffff
[   14.436000] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[   14.436000] sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
[   14.436000] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 16
[   14.436000] sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
[   14.436000] mmc0: SDHCI at 0xd8001c00 irq 16 DMA
[   14.444000] input: PS/2 Mouse as /class/input/input2
[   14.464000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[   14.880000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   14.880000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   14.932000] ieee80211_crypt: registered algorithm 'NULL'
[   14.944000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   14.944000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   15.012000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.3mp
[   15.012000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   15.072000] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[   15.156000] cs: IO port probe 0x100-0x3af: clean.
[   15.156000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   15.156000] cs: IO port probe 0x820-0x8ff: clean.
[   15.156000] cs: IO port probe 0xc00-0xcf7: clean.
[   15.160000] cs: IO port probe 0xa00-0xaff: clean.
[   15.836000] si3054: cannot initialize. EXT MID = 0000
[   15.852000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[   15.852000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   15.852000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.596000] fuse init (API version 7.8)
[   16.644000] lp: driver loaded but no devices found
[   16.688000] Adding 771080k swap on /dev/disk/by-uuid/beb9fa37-eb1b-4fa6-bfbf-165d9655f917.  Priority:-1 extents:1 across:771080k
[   16.828000] EXT3 FS on sda6, internal journal
[   17.776000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[   18.272000] NET: Registered protocol family 17
[   57.812000] NET: Registered protocol family 10
[   57.812000] lo: Disabled Privacy Extensions
[   57.812000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   75.052000] ibm_acpi: ec object not found
[   75.136000] No dock devices found.
[   75.212000] ACPI: Battery Slot [BAT1] (battery present)
[   75.220000] ACPI: AC Adapter [ACAD] (on-line)
[   75.228000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[   75.296000] input: Power Button (FF) as /class/input/input4
[   75.312000] ACPI: Power Button (FF) [PWRF]
[   75.360000] input: Lid Switch as /class/input/input5
[   75.376000] ACPI: Lid Switch [LID0]
[   75.420000] input: Power Button (CM) as /class/input/input6
[   75.436000] ACPI: Power Button (CM) [PWRB]
[   75.448000] Using specific hotkey driver
[   75.460000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   75.460000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   77.440000] [drm] Initialized drm 1.1.0 20060810
[   77.464000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[   77.464000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   79.516000] apm: BIOS not found.
[   85.708000] Bluetooth: Core ver 2.11
[   85.712000] NET: Registered protocol family 31
[   85.712000] Bluetooth: HCI device and connection manager initialized
[   85.712000] Bluetooth: HCI socket layer initialized
[   85.816000] Bluetooth: L2CAP ver 2.8
[   85.816000] Bluetooth: L2CAP socket layer initialized
[   86.072000] Bluetooth: RFCOMM socket layer initialized
[   86.072000] Bluetooth: RFCOMM TTY layer initialized
[   86.072000] Bluetooth: RFCOMM ver 1.8
[  139.604000] usb 2-2: new low speed USB device using uhci_hcd and address 2
[  139.860000] usb 2-2: configuration #1 chosen from 1 choice
[  140.408000] usbcore: registered new interface driver hiddev
[  140.448000] input: HID 1241:1166 as /class/input/input7
[  140.448000] input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.1-2
[  140.448000] usbcore: registered new interface driver usbhid
[  140.448000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[  218.900000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  281.904000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  299.512000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  301.448000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  315.656000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  343.440000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  358.204000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  366.400000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  432.848000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  485.476000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  493.952000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  520.184000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  869.296000] ieee80211_crypt: registered algorithm 'WEP'
[  871.556000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  882.496000] eth0: no IPv6 routers present
[ 1141.236000] ACPI: PCI interrupt for device 0000:04:00.0 disabled
[ 1143.684000] Disabling non-boot CPUs ...
[ 1143.684000] Stopping tasks ... done.
[ 1143.916000] Suspending console(s)
[ 1144.556000]  usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[ 1144.556000] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[ 1144.556000]  usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[ 1144.556000]  usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[ 1144.556000] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[ 1144.556000]  usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[ 1144.556000]  usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[ 1144.556000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[ 1144.556000]  usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[ 1144.556000]  usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[ 1144.556000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[ 1144.556000]  usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[ 1145.056000] ACPI: PCI interrupt for device 0000:06:04.2 disabled
[ 1145.072000] ohci1394 does not fully support suspend and resume yet
[ 1145.092000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 1145.108000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 1145.124000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 1145.132000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 1145.148000] Back to C!
[ 1172.188000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 1172.204000] PM: Writing back config space on device 0000:00:1b.0 at offset b (was 0, writing ff011179)
[ 1172.204000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[ 1172.204000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 1172.204000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 1172.400000] si3054: cannot initialize. EXT MID = 0000
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 4010a)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing d1f1d001)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing d5f0d400)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing 20200)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100407)
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 4020a)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing d3f1d201)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing d7f0d600)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 3030)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010)
[ 1172.408000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100407)
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1172.408000] usb usb1: root hub lost power or was reset
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1172.408000] usb usb2: root hub lost power or was reset
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1172.408000] usb usb3: root hub lost power or was reset
[ 1172.408000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
[ 1172.408000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 1172.408000] usb usb4: root hub lost power or was reset
[ 1172.424000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
[ 1172.424000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1172.424000] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 1fff1, writing 33f13001)
[ 1172.424000] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20070600, writing 200a0600)
[ 1172.424000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 1172.440000] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00005, writing 2b80005)
[ 1172.440000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1172.440000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset f (was 100, writing 10a)
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset 4 (was 0, writing d6000000)
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset 3 (was 0, writing 10)
[ 1172.440000] PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100000, writing 100002)
[ 1172.508000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21]  MMIO=[d8001000-d80017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset f (was 744010a, writing 5c0010a)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset e (was 0, writing 48fc)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset d (was 0, writing 4800)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset c (was 0, writing 44fc)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset b (was 0, writing 4400)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset a (was 0, writing 37fff000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 9 (was 0, writing 34000000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 8 (was 0, writing 33fff000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 7 (was 0, writing 30000000)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 6 (was 20070706, writing b00a0706)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.0 at offset 3 (was 824008, writing 82a820)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset f (was 40102ff, writing 401020a)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset 4 (was 0, writing d8001800)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset 3 (was 800000, writing 802010)
[ 1172.512000] PM: Writing back config space on device 0000:06:04.1 at offset 1 (was 2100000, writing 2100006)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset f (was 482002ff, writing 4820020a)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset 4 (was 0, writing d8001c00)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset 3 (was 800000, writing 802010)
[ 1172.528000] PM: Writing back config space on device 0000:06:04.2 at offset 1 (was 2100000, writing 2100006)
[ 1172.528000] ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 17 (level, low) -> IRQ 16
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset f (was 40102ff, writing 401020a)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset 4 (was 0, writing d8002000)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset 3 (was 800000, writing 802010)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.3 at offset 1 (was 2100000, writing 2100006)
[ 1172.532000] PM: Writing back config space on device 0000:06:04.4 at offset 4 (was 0, writing d8001900)
[ 1172.532000] pnp: Device 00:08 does not support activation.
[ 1172.532000] pnp: Device 00:09 does not support activation.
[ 1172.816000]  usbdev5.1_ep00: PM: resume from 0, parent usb5 still 2
[ 1172.816000]  usbdev5.1_ep81: PM: resume from 0, parent 5-0:1.0 still 2
[ 1172.816000]  usbdev2.2_ep00: PM: resume from 0, parent 2-2 still 2
[ 1172.816000] usbhid 2-2:1.0: PM: resume from 2, parent 2-2 still 2
[ 1172.816000]  usbdev2.2_ep81: PM: resume from 0, parent 2-2:1.0 still 2
[ 1172.816000] Restarting tasks ... <6>usb 2-2: USB disconnect, address 2
[ 1172.872000] done.
[ 1172.872000] Enabling non-boot CPUs ...
[ 1172.872000] APIC error on CPU0: 00(40)
[ 1173.484000] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 1173.500000] input: PS/2 Mouse as /class/input/input8
[ 1173.516000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
[ 1173.684000] usb 2-2: configuration #1 chosen from 1 choice
[ 1173.732000] ata1.00: configured for UDMA/100
[ 1173.732000] input: HID 1241:1166 as /class/input/input10
[ 1173.732000] input: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.1-2
[ 1173.756000] SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
[ 1173.772000] sda: Write Protect is off
[ 1173.772000] sda: Mode Sense: 00 3a 00 00
[ 1173.780000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1173.932000] ata2.00: configured for UDMA/33
[ 1174.692000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 1174.692000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 1174.756000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.3mp
[ 1174.756000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 1174.756000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 16
[ 1174.756000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 1174.756000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 1175.516000] input: Power Button (FF) as /class/input/input11
[ 1175.516000] ACPI: Power Button (FF) [PWRF]
[ 1175.516000] input: Lid Switch as /class/input/input12
[ 1175.516000] ACPI: Lid Switch [LID0]
[ 1175.516000] input: Power Button (CM) as /class/input/input13
[ 1175.516000] ACPI: Power Button (CM) [PWRB]
[ 1175.920000] ACPI: AC Adapter [ACAD] (on-line)
[ 1176.008000] ACPI: Battery Slot [BAT1] (battery present)
[ 1176.540000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 1176.816000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1243.632000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1254.612000] eth0: no IPv6 routers present
[ 1281.688000] eth0: no IPv6 routers present

Revision history for this message

Willem Kan (wrkan-deactivatedaccount) wrote on 2007-02-03:

#6

PS: from control center, it is stated I have a PRO/Wireless 3945ABG Network device, driver ipw3945.

Thanks, Willem

Revision history for this message

Stéphane Graber (stgraber) wrote on 2007-02-19:

#7

Did you check this issue with Herd4 ?

Revision history for this message

Willem Kan (wrkan-deactivatedaccount) wrote on 2007-02-24:

#8

Yes, with knetworkmanager... it works! My network is reloaded after suspend.
Thanks!

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-03-23:

#9

This bug report is being closed due to your last comment regarding this being fixed with an update. Thanks again for taking the time to report this bug and helping to make Ubuntu better. Feel free to submit any future bugs you may find.

Affects		Status	Importance	Assigned to	Milestone
	Ubuntu	Fix Released	Undecided	Brian Murray
Nominated for Feisty by Willem Kan

Ubuntu

Internet via DHCP lost after suspend on Toshiba laptop

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches