11.07 RC panda text cons does not work

11.07 RC nano image on panda hardware.

Serial cons work, text cons is at low 640x480 res (it's driven a higher res in the past) accepts no input from the keyboard.

dmesg log:

root@linaro-nano:~# dmesg
[ 0.000000] Linux version 3.0.0-1001-linaro-omap (buildd@aizoaceae) (gcc version 4.5.2 (Ubuntu/Linaro 4.5)
[ 0.000000] CPU: ARMv7 Processor [411fc092] revision 2 (ARMv7), cr=50c5387f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: OMAP4 Panda board, model: TI OMAP4 PandaBoard
[ 0.000000] Truncating RAM at a0000000-bfffffff to -afffffff (vmalloc region overlap).
[ 0.000000] Reserving 50331648 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] OMAP4430 ES2.1
[ 0.000000] SRAM: Mapped pa 0x40300000 to va 0xfe400000 size: 0xe000
[ 0.000000] On node 0 totalpages: 169984
[ 0.000000] free_area_init_node: node 0, pgdat c05c1ac0, node_mem_map c0afd000
[ 0.000000] Normal zone: 1536 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 168448 pages, LIFO batch:31
[ 0.000000] powerdomain: waited too long for powerdomain dss_pwrdm to complete transition
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c110b000 s6624 r8192 d13856 u32768
[ 0.000000] pcpu-alloc: s6624 r8192 d13856 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 168448
[ 0.000000] Kernel command line: console=tty0 console=ttyO2,115200n8 root=UUID=a5e7c6dd-7281-45fa-8e58-80
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 456MB 206MB 2MB = 664MB total
[ 0.000000] Memory: 660260k/660260k available, 68828k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
[ 0.000000] modules : 0xbf800000 - 0xc0000000 ( 8 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0040000 ( 224 kB)
[ 0.000000] .text : 0xc0040000 - 0xc0549b28 (5159 kB)
[ 0.000000] .data : 0xc054a000 - 0xc05c2360 ( 481 kB)
[ 0.000000] .bss : 0xc05c2384 - 0xc0afcb98 (5355 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:410
[ 0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
[ 0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3695 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.002349] Calibrating delay loop... 2007.19 BogoMIPS (lpj=7839744)
[ 0.062530] pid_max: default: 32768 minimum: 301
[ 0.063140] Security Framework initialized
[ 0.063293] AppArmor: AppArmor initialized
[ 0.063323] Yama: becoming mindful.
[ 0.063720] Mount-cache hash table entries: 512
[ 0.067108] CPU: Testing write buffer coherency: ok
[ 0.067962] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.068023] Calibrating local timer... 491.74MHz.
[ 0.109588] L310 cache controller enabled
[ 0.109619] l2x0: 16 ways, CACHE_ID 0x410000c4, AUX_CTRL 0x7e470000, Cache size: 1048576 B
[ 0.186553] CPU1: Booted secondary processor
[ 0.186584] CPU1: Unknown IPI message 0x1
[ 0.254455] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.254608] Brought up 2 CPUs
[ 0.254669] SMP: Total of 2 processors activated (3972.37 BogoMIPS).
[ 0.256164] devtmpfs: initialized
[ 0.264434] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
[ 0.264465] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
[ 0.264495] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
[ 0.264526] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
[ 0.264556] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
[ 0.264587] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
[ 0.264587] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
[ 0.264617] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
[ 0.264648] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
[ 0.264678] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for dsp
[ 0.264709] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for ipu
[ 0.265014] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
[ 0.270782] print_constraints: dummy:
[ 0.271484] NET: Registered protocol family 16
[ 0.272277] Trying to unpack rootfs image as initramfs...
[ 0.385192] Freeing initrd memory: 1804K
[ 0.385711] GPMC revision 6.0
[ 0.390350] omap_device: omap_gpio.0: new worst case activate latency 0: 30517
[ 0.391571] OMAP GPIO hardware version 0.1
[ 0.392303] OMAP GPIO hardware version 0.1
[ 0.392974] OMAP GPIO hardware version 0.1
[ 0.393615] OMAP GPIO hardware version 0.1
[ 0.394256] OMAP GPIO hardware version 0.1
[ 0.394958] OMAP GPIO hardware version 0.1
[ 0.398529] omap_mux_init: Add partition: #1: core, flags: 2
[ 0.399902] omap_mux_init: Add partition: #2: wkup, flags: 2
[ 0.400085] error setting wl12xx data
[ 0.403015] omap_device: omap_uart.0: new worst case deactivate latency 0: 30517
[ 0.410217] No ATAGs?
[ 0.410217] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.410247] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[ 0.410308] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.415557] pm_dbg_init: only OMAP3 supported
[ 0.416168] OMAP DMA hardware revision 0.0
[ 0.449981] bio: create slab <bio-0> at 0
[ 0.451873] print_constraints: vwl1271: 1800 mV
[ 0.455108] SCSI subsystem initialized
[ 0.458801] usbcore: registered new interface driver usbfs
[ 0.459289] usbcore: registered new interface driver hub
[ 0.459625] usbcore: registered new device driver usb
[ 0.475708] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
[ 0.478363] Skipping twl internal clock init and using bootloader value (unknown osc rate)
[ 0.479370] twl6030: PIH (irq 39) chaining IRQs 368..387
[ 0.481048] print_constraints: VUSB: 3300 mV normal standby
[ 0.680572] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
[ 0.682281] print_constraints: VMMC: 1200 <--> 3000 mV at 3000 mV normal standby
[ 0.683441] print_constraints: VPP: 1800 <--> 2500 mV at 1900 mV normal standby
[ 0.684387] print_constraints: VCXIO: 1800 mV normal standby
[ 0.685424] print_constraints: VDAC: 1800 mV normal standby
[ 0.686553] print_constraints: VAUX2_6030: 1200 <--> 2800 mV at 1800 mV normal standby
[ 0.687713] print_constraints: VAUX3_6030: 1000 <--> 3000 mV at 1200 mV normal standby
[ 0.688842] print_constraints: CLK32KG:
[ 0.689819] print_constraints: VANA: 2100 mV normal standby
[ 0.704223] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
[ 0.719451] omap_i2c omap_i2c.3: bus 3 rev4.0 at 100 kHz
[ 0.734710] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
[ 0.735107] omap_device: omap_i2c.4: new worst case deactivate latency 0: 30517
[ 0.738891] NetLabel: Initializing
[ 0.738922] NetLabel: domain hash size = 128
[ 0.738952] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.739105] NetLabel: unlabeled traffic allowed by default
[ 0.739166] Switching to clocksource 32k_counter
[ 0.740783] AppArmor: AppArmor Filesystem Enabled
[ 0.742370] Switched to NOHz mode on CPU #0
[ 0.743072] Switched to NOHz mode on CPU #1
[ 0.772857] NET: Registered protocol family 2
[ 0.773254] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.774444] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.776580] TCP bind hash table entries: 65536 (order: 9, 2621440 bytes)
[ 0.791290] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.791473] TCP reno registered
[ 0.791503] UDP hash table entries: 512 (order: 3, 49152 bytes)
[ 0.791778] UDP-Lite hash table entries: 512 (order: 3, 49152 bytes)
[ 0.792602] NET: Registered protocol family 1
[ 0.793670] RPC: Registered named UNIX socket transport module.
[ 0.793701] RPC: Registered udp transport module.
[ 0.793731] RPC: Registered tcp transport module.
[ 0.793731] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.819335] audit: initializing netlink socket (disabled)
[ 0.819519] type=2000 audit(0.828:1): initialized
[ 0.853149] VFS: Disk quotas dquot_6.5.2
[ 0.853363] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.854705] JFFS2 version 2.2. (NAND) (SUMMARY) ?© 2001-2006 Red Hat, Inc.
[ 0.856506] Btrfs loaded
[ 0.856567] msgmni has been set to 1293
[ 0.858306] io scheduler noop registered
[ 0.858337] io scheduler deadline registered
[ 0.858459] io scheduler cfq registered (default)
[ 0.919219] OMAP DSS rev 4.0
[ 0.923706] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.216552] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
[ 1.341064] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
[ 1.466064] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
[ 2.395721] console [ttyO2] enabled
[ 2.481689] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[ 2.607330] [drm] Initialized drm 1.1.0 20060810
[ 2.629058] brd: module loaded
[ 2.640655] loop: module loaded
[ 2.647155] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 2.654174] omap2-nand driver initializing
[ 2.658843] OneNAND driver initializing
[ 2.666656] usbcore: registered new interface driver asix
[ 2.672637] usbcore: registered new interface driver cdc_ether
[ 2.679077] usbcore: registered new interface driver net1080
[ 2.685302] usbcore: registered new interface driver cdc_subset
[ 2.691802] usbcore: registered new interface driver zaurus
[ 2.697692] cdc_ncm: 01-June-2011
[ 2.701477] usbcore: registered new interface driver cdc_ncm
[ 2.708312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.715179] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
[ 2.715393] ehci-omap ehci-omap.0: failed to get ehci port0 regulator
[ 2.715515] ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
[ 2.715545] ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
[ 2.715545] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.723175] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
[ 2.731323] ehci-omap ehci-omap.0: park 0
[ 2.731323] ehci-omap ehci-omap.0: support lpm
[ 2.731353] ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
[ 2.738433] ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
[ 2.738464] ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
[ 2.747283] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.753875] usb usb1: default language 0x0409
[ 2.753967] usb usb1: udev 1, busnum 1, minor = 0
[ 2.753967] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.761138] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.768737] usb usb1: Product: OMAP-EHCI Host Controller
[ 2.774353] usb usb1: Manufacturer: Linux 3.0.0-1001-linaro-omap ehci_hcd
[ 2.781524] usb usb1: SerialNumber: ehci-omap.0
[ 2.788116] usb usb1: usb_probe_device
[ 2.788146] usb usb1: configuration #1 chosen from 1 choice
[ 2.788543] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.789184] hub 1-0:1.0: usb_probe_interface
[ 2.789184] hub 1-0:1.0: usb_probe_interface - got id
[ 2.789215] hub 1-0:1.0: USB hub found
[ 2.793273] hub 1-0:1.0: 3 ports detected
[ 2.797698] hub 1-0:1.0: standalone hub
[ 2.797729] hub 1-0:1.0: individual port power switching
[ 2.797729] hub 1-0:1.0: individual port over-current protection
[ 2.797729] hub 1-0:1.0: power on to power good time: 20ms
[ 2.798034] hub 1-0:1.0: local power source is good
[ 2.798034] hub 1-0:1.0: enabling power on all ports
[ 2.799560] ehci-omap ehci-omap.0: ...powerup ports...
[ 2.825622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.832122] ohci_hcd: block sizes: ed 64 td 64
[ 2.832305] ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
[ 2.839233] ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
[ 2.847259] ohci-omap3 ohci-omap3.0: starting OHCI controller
[ 2.847442] ohci-omap3 ohci-omap3.0: created debug files
[ 2.847473] ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
[ 2.895904] ehci-omap ehci-omap.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.895935] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.931030] ohci-omap3 ohci-omap3.0: OHCI controller state
[ 2.931060] ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers
[ 2.931060] ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3
[ 2.931091] ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0
[ 2.931091] ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF
[ 2.931091] ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH
[ 2.931121] ohci-omap3 ohci-omap3.0: hcca frame #0014
[ 2.931121] ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
[ 2.931152] ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 2.931152] ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE
[ 2.931182] ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS
[ 2.931182] ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS
[ 2.931182] ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS
[ 2.931274] usb usb2: default language 0x0409
[ 2.931335] usb usb2: udev 1, busnum 2, minor = 128
[ 2.931365] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.938507] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.946136] usb usb2: Product: OMAP3 OHCI Host Controller
[ 2.951843] usb usb2: Manufacturer: Linux 3.0.0-1001-linaro-omap ohci_hcd
[ 2.958984] usb usb2: SerialNumber: ohci-omap3.0
[ 2.964691] usb usb2: usb_probe_device
[ 2.964721] usb usb2: configuration #1 chosen from 1 choice
[ 2.964752] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.965179] hub 2-0:1.0: usb_probe_interface
[ 2.965179] hub 2-0:1.0: usb_probe_interface - got id
[ 2.965209] hub 2-0:1.0: USB hub found
[ 2.969207] hub 2-0:1.0: 3 ports detected
[ 2.973419] hub 2-0:1.0: standalone hub
[ 2.973419] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.973419] hub 2-0:1.0: global over-current protection
[ 2.973449] hub 2-0:1.0: power on to power good time: 20ms
[ 2.973480] hub 2-0:1.0: local power source is good
[ 2.973510] hub 2-0:1.0: no over-current condition exists
[ 2.973510] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.974945] usbcore: registered new interface driver cdc_wdm
[ 2.980895] Initializing USB Mass Storage driver...
[ 2.986419] usbcore: registered new interface driver usb-storage
[ 2.992919] USB Mass Storage support registered.
[ 2.997924] hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
[ 2.998016] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.998596] usbcore: registered new interface driver libusual
[ 3.059967] ehci-omap ehci-omap.0: port 1 high speed
[ 3.059997] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 3.122283] usb 1-1: new high speed USB device number 2 using ehci-omap
[ 3.184967] ehci-omap ehci-omap.0: port 1 high speed
[ 3.184997] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 3.505157] usb 1-1: udev 2, busnum 1, minor = 1
[ 3.505157] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 3.512207] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.520599] usb 1-1: usb_probe_device
[ 3.520629] usb 1-1: configuration #1 chosen from 1 choice
[ 3.521118] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 3.521545] hub 1-1:1.0: usb_probe_interface
[ 3.521545] hub 1-1:1.0: usb_probe_interface - got id
[ 3.521575] hub 1-1:1.0: USB hub found
[ 3.525756] hub 1-1:1.0: 5 ports detected
[ 3.529998] hub 1-1:1.0: compound device; port removable status: FRRRR
[ 3.530029] hub 1-1:1.0: individual port power switching
[ 3.530029] hub 1-1:1.0: individual port over-current protection
[ 3.536499] hub 1-1:1.0: TT per port
[ 3.536499] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.536499] hub 1-1:1.0: power on to power good time: 100ms
[ 3.536926] hub 1-1:1.0: local power source is good
[ 3.536926] hub 1-1:1.0: enabling power on all ports
[ 3.552917] hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 3.553375] usbcore: registered new interface driver usbtest
[ 3.561004] mousedev: PS/2 mouse device common for all mice
[ 3.570007] omap_device: omap_i2c.1: new worst case activate latency 0: 61035
[ 3.579406] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
[ 3.586120] twl_rtc twl_rtc: Power up reset detected.
[ 3.592590] twl_rtc twl_rtc: Enabling TWL-RTC.
[ 3.597869] i2c /dev entries driver
[ 3.604217] Driver for 1-wire Dallas network protocol.
[ 3.610595] omap_device: omap_wdt.-1: new worst case activate latency 0: 91552
[ 3.619293] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
[ 3.627380] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: <email address hidden>
[ 3.643798] Registered led device: pandaboard::status1
[ 3.644287] Registered led device: pandaboard::status2
[ 3.645568] usbcore: registered new interface driver usbhid
[ 3.651458] usbhid: USB HID core driver
[ 3.655639] oprofile: hardware counters not available
[ 3.661010] hub 1-1:1.0: port 1: status 0101 change 0001
[ 3.661102] oprofile: using timer interrupt.
[ 3.666625] TCP cubic registered
[ 3.670043] Initializing XFRM netlink socket
[ 3.674926] NET: Registered protocol family 10
[ 3.681304] IPv6 over IPv4 tunneling driver
[ 3.687530] NET: Registered protocol family 17
[ 3.692260] NET: Registered protocol family 15
[ 3.697479] Registering the dns_resolver key type
[ 3.702850] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[ 3.711212] ThumbEE CPU extension supported.
[ 3.715759] Registering SWP/SWPB emulation handler
[ 3.727874] Power Management for TI OMAP4.
[ 3.751556] clock: disabling unused clocks to save power
[ 3.762939] usb 1-1: link qh256-0001/ec20a1e0 start 1 [1/0 us]
[ 3.763000] hub 1-1:1.0: state 7 ports 5 chg 0002 evt 0000
[ 3.763763] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 3.865142] usb 1-1.1: new high speed USB device number 3 using ehci-omap
[ 3.989410] ohci-omap3 ohci-omap3.0: auto-stop root hub
[ 4.018890] Console: switching to colour frame buffer device 80x30
[ 4.021148] usb 1-1.1: udev 3, busnum 1, minor = 2
[ 4.021148] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 4.021179] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.021911] usb 1-1.1: usb_probe_device
[ 4.021911] usb 1-1.1: configuration #1 chosen from 1 choice
[ 4.053405] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 4.054168] usbtest 1-1.1:1.0: usb_probe_interface
[ 4.054168] usbtest 1-1.1:1.0: usb_probe_interface - got id
[ 4.055969] omapdss DPI: Could not find exact pixel clock. Requested 23500 kHz, got 23630 kHz
[ 4.071777] hub 1-1:1.0: port 2, status 0101, change 0001, 12 Mb/s
[ 4.072387] regulator_init_complete: VANA: incomplete constraints, leaving on
[ 4.083770] regulator_init_complete: VDAC: incomplete constraints, leaving on
[ 4.094024] regulator_init_complete: VCXIO: incomplete constraints, leaving on
[ 4.106750] regulator_init_complete: VUSB: incomplete constraints, leaving on
[ 4.117004] mmc0: host does not support reading read-only switch. assuming write-enable.
[ 4.130615] twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 4.145782] Freeing init memory: 224K
[ 4.152282] mmc0: new SDHC card at address b368
[ 4.162292] mmcblk0: mmc0:b368 SD 14.8 GiB
[ 4.174163] mmcblk0: p1 p2
[ 4.224060] hub 1-1:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[ 4.310028] usb 1-1.2: new high speed USB device number 4 using ehci-omap
[ 4.324035] udev[619]: starting version 167
[ 4.436157] usb 1-1.2: default language 0x0409
[ 4.436920] usb 1-1.2: udev 4, busnum 1, minor = 3
[ 4.436920] usb 1-1.2: New USB device found, idVendor=1234, idProduct=2088
[ 4.546691] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.586029] usb 1-1.2: Product: V88
[ 4.593811] usb 1-1.2: Manufacturer: V88
[ 4.606658] usb 1-1.2: SerialNumber: 18165700C0D7BC09
[ 4.619049] usb 1-1.2: usb_probe_device
[ 4.619079] usb 1-1.2: configuration #1 chosen from 1 choice
[ 4.619415] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 4.627716] usb-storage 1-1.2:1.0: usb_probe_interface
[ 4.627746] usb-storage 1-1.2:1.0: usb_probe_interface - got id
[ 4.641571] scsi0 : usb-storage 1-1.2:1.0
[ 4.661102] hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
[ 4.818603] hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
[ 4.904022] usb 1-1.3: new high speed USB device number 5 using ehci-omap
[ 5.068511] usb 1-1.3: default language 0x0409
[ 5.074707] EXT3-fs: barriers not enabled
[ 5.077178] usb 1-1.3: udev 5, busnum 1, minor = 4
[ 5.077178] usb 1-1.3: New USB device found, idVendor=05ac, idProduct=1005
[ 5.077178] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.077178] usb 1-1.3: Product: Keyboard Hub
[ 5.077209] usb 1-1.3: Manufacturer: Apple Inc.
[ 5.077209] usb 1-1.3: SerialNumber: 000000000000
[ 5.077819] usb 1-1.3: usb_probe_device
[ 5.077819] usb 1-1.3: configuration #1 chosen from 1 choice
[ 5.079833] usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
[ 5.080261] hub 1-1.3:1.0: usb_probe_interface
[ 5.080261] hub 1-1.3:1.0: usb_probe_interface - got id
[ 5.080261] hub 1-1.3:1.0: USB hub found
[ 5.080688] hub 1-1.3:1.0: 3 ports detected
[ 5.080718] hub 1-1.3:1.0: compound device; port removable status: RFR
[ 5.080718] hub 1-1.3:1.0: individual port power switching
[ 5.080718] hub 1-1.3:1.0: individual port over-current protection
[ 5.080718] hub 1-1.3:1.0: Single TT
[ 5.080749] hub 1-1.3:1.0: TT requires at most 8 FS bit times (666 ns)
[ 5.080749] hub 1-1.3:1.0: Port indicators are supported
[ 5.080749] hub 1-1.3:1.0: power on to power good time: 100ms
[ 5.080902] hub 1-1.3:1.0: hub controller current requirement: 200mA
[ 5.080902] hub 1-1.3:1.0: 100mA bus power budget for each child
[ 5.081024] hub 1-1.3:1.0: enabling power on all ports
[ 5.082305] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000
[ 5.138732] kjournald starting. Commit interval 5 seconds
[ 5.139312] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
[ 5.177215] hub 1-1.3:1.0: port 1: status 0101 change 0001
[ 5.177520] hub 1-1.3:1.0: port 2: status 0101 change 0001
[ 5.278564] usb 1-1.3: link qh256-0001/ec2bbe60 start 2 [1/0 us]
[ 5.278625] hub 1-1.3:1.0: state 7 ports 3 chg 0006 evt 0000
[ 5.278839] hub 1-1.3:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 5.369201] usb 1-1.3.1: new low speed USB device number 6 using ehci-omap
[ 5.500427] usb 1-1.3.1: skipped 1 descriptor after interface
[ 5.501037] usb 1-1.3.1: default language 0x0409
[ 5.503784] usb 1-1.3.1: udev 6, busnum 1, minor = 5
[ 5.503784] usb 1-1.3.1: New USB device found, idVendor=046d, idProduct=c00e
[ 5.513488] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.525665] usb 1-1.3.1: Product: USB-PS/2 Optical Mouse
[ 5.533447] usb 1-1.3.1: Manufacturer: Logitech
[ 5.540954] usb 1-1.3.1: usb_probe_device
[ 5.540985] usb 1-1.3.1: configuration #1 chosen from 1 choice
[ 5.541595] usb 1-1.3.1: adding 1-1.3.1:1.0 (config #1, interface 0)
[ 5.541900] usbtest 1-1.3.1:1.0: usb_probe_interface
[ 5.541931] usbtest 1-1.3.1:1.0: usb_probe_interface - got id
[ 5.541992] usbhid 1-1.3.1:1.0: usb_probe_interface
[ 5.542022] usbhid 1-1.3.1:1.0: usb_probe_interface - got id
[ 5.546997] input: Logitech USB-PS/2 Optical Mouse as /devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-10
[ 5.566772] generic-usb 0003:046D:C00E.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse]0
[ 5.585083] hub 1-1.3:1.0: 202mA power budget left
[ 5.585327] hub 1-1.3:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 5.649200] scsi 0:0:0:0: Direct-Access V88 V88 5.00 PQ: 0 ANSI: 2
[ 5.670471] sd 0:0:0:0: [sda] 3901440 512-byte logical blocks: (1.99 GB/1.86 GiB)
[ 5.670654] usb 1-1.3.2: new low speed USB device number 7 using ehci-omap
[ 5.694641] sd 0:0:0:0: [sda] Write Protect is off
[ 5.702301] sd 0:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 5.704345] sd 0:0:0:0: [sda] No Caching mode page present
[ 5.712738] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.727722] sd 0:0:0:0: [sda] No Caching mode page present
[ 5.736022] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.746124] sda: sda1
[ 5.758331] sd 0:0:0:0: [sda] No Caching mode page present
[ 5.766784] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.775817] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.790283] usb 1-1.3.2: skipped 1 descriptor after interface
[ 5.790313] usb 1-1.3.2: skipped 1 descriptor after interface
[ 5.790893] usb 1-1.3.2: default language 0x0409
[ 5.793060] usb 1-1.3.2: udev 7, busnum 1, minor = 6
[ 5.793060] usb 1-1.3.2: New USB device found, idVendor=05ac, idProduct=021d
[ 5.803192] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.816009] usb 1-1.3.2: Product: Apple Keyboard
[ 5.823364] usb 1-1.3.2: Manufacturer: Apple Inc.
[ 5.831390] usb 1-1.3.2: usb_probe_device
[ 5.831420] usb 1-1.3.2: configuration #1 chosen from 1 choice
[ 5.832183] usb 1-1.3.2: adding 1-1.3.2:1.0 (config #1, interface 0)
[ 5.832519] usbtest 1-1.3.2:1.0: usb_probe_interface
[ 5.832519] usbtest 1-1.3.2:1.0: usb_probe_interface - got id
[ 5.832611] usbhid 1-1.3.2:1.0: usb_probe_interface
[ 5.832611] usbhid 1-1.3.2:1.0: usb_probe_interface - got id
[ 5.833160] usb 1-1.3.2: adding 1-1.3.2:1.1 (config #1, interface 1)
[ 5.833435] usbtest 1-1.3.2:1.1: usb_probe_interface
[ 5.833435] usbtest 1-1.3.2:1.1: usb_probe_interface - got id
[ 5.833526] usbhid 1-1.3.2:1.1: usb_probe_interface
[ 5.833526] usbhid 1-1.3.2:1.1: usb_probe_interface - got id
[ 5.834472] hub 1-1.3:1.0: 182mA power budget left
[ 5.834472] hub 1-1.3:1.0: state 7 ports 3 chg 0000 evt 0002
[ 5.998046] hub 2-0:1.0: hub_suspend
[ 5.998352] usb usb2: bus auto-suspend
[ 5.998382] ohci-omap3 ohci-omap3.0: suspend root hub
[ 6.409667] udev[779]: starting version 167
[ 6.495361] EXT3-fs (mmcblk0p2): using internal journal
[ 7.222473] smsc95xx 1-1.1:1.0: usb_probe_interface
[ 7.222503] smsc95xx 1-1.1:1.0: usb_probe_interface - got id
[ 7.222625] smsc95xx v1.0.4
[ 7.369537] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernc
[ 7.370208] usbcore: registered new interface driver smsc95xx
[ 8.096710] usb 1-1.1: link qh8-0001/ec17de20 start 3 [1/0 us]
[ 10.029083] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 10.575439] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 19.051910] eth0: no IPv6 routers present
root@linaro-nano:~#