dbus 1.10.10-1ubuntu1 source package in Ubuntu

Changelog

dbus (1.10.10-1ubuntu1) yakkety; urgency=medium

  [ Jeremy Bicha ]
  * Merge with Debian (LP: #1622401), remaining changes:
    - Add debian/dbus.user-session.upstart.
    - debian, dbus.postinst, debian/rules: Don't start D-Bus on package
      installation, as that doesn't work any more. Instead, start dbus.socket
      in postinst, which will then start D-Bus on demand after package
      installation.
    - Add debian/patches/dont-stop-dbus.patch: Don't stop D-Bus in the service
      unit (see patch header and upstream bug for details). Fixes various
      causes of shutdown hangs, particularly with remote file systems. (LP:
      #1438612) (LP: #1540282)
    - aa-get-connection-apparmor-security-context.patch: This is not
      intended for upstream inclusion. It implements a bus method
      (GetConnectionAppArmorSecurityContext) to get a connection's AppArmor
      security context but upstream D-Bus has recently added a generic way of
      getting a connection's security credentials (GetConnectionCredentials).
      Ubuntu should carry this patch until packages in the archive are moved
      over to the new, generic method of getting a connection's credentials.
  * Dropped changes:
    - debian/dbus.preinst: divert the dbus-daemon-launch-helper if upgrading
      from < 1.9.4-2~. This will make sure we keep the setuid bit during upgrade.
      (LP: #1555237)
    - Drop system upstart job.

  [ Martin Pitt ]
  * Clean up /etc/init/dbus.conf on upgrades. This needs to be kept until
    after 18.04 LTS.

dbus (1.10.10-1) unstable; urgency=medium

  * New upstream stable release 1.10.10
  * Provide new virtual packages for other packages to depend on:
    - dbus-session-bus: any implementation of the D-Bus well-known session bus
      (provided by: dbus-user-session, dbus-x11)
    - default-dbus-session-bus: the recommended implementation of
      dbus-session-bus (currently provided by: dbus-user-session)
  * Add arm64, mips64el, ppc64el to the list of architectures that
    have valgrind
  * debian/gbp.conf: use DEP-14 branch names
  * Standards-Version: 3.9.8 (no changes needed)
  * debian/rules: fail the build if "make install" installs anything we
    don't package or delete. Only do this for final releases (suite
    in debian/changelog is not UNRELEASED) to facilitate future
    autobuilding of new upstream releases.
  * debian/rules: do not require symbols file to be complete if the
    suite in debian/changelog is UNRELEASED, again to facilitate
    autobuilding new upstream releases.
  * debian/source/options: don't fail dpkg-source on changes to
    build-aux/{compile,depcomp,missing}. We regenerate that directory anyway,
    and during a snapshot build they might become symlinks.
  * debian/rules: do the build in debian/build-* so it's easier to .gitignore
  * debian/.gitignore: update
  * Use the correct systemctl for Debian even if not installed on the build
    system. (Regression in 1.10.2)

dbus (1.10.8-1) unstable; urgency=medium

  * New upstream release
  * dbus.prerm: ensure that dbus.socket is stopped before removal,
    so that a new connection to the bus won't cause dbus.service to be
    restarted (Closes: #813970)
  * debian/75dbus_dbus-launch: when not using systemd --user or the
    dbus-user-session package is not installed, start dbus-daemon early,
    then upload the full environment from Xsession.d later on
    (in 95dbus_update-activation-env). This more closely matches the
    behaviour with dbus-user-session. (Closes: #815503; thanks to Samuel
    Thibault)
  * Switch Vcs-Git to https (see #810378)
  * debian/upstream/signing-key.asc: add upstream signing keys
    (just my keys for now, in practice I do almost all dbus releases)
  * debian/watch: use https and describe how to download signatures
  * Standards-Version: 3.9.7 (no changes needed)
  * Sort .install files and remove unnecessary debian/tmp prefix
  * Normalize lists of packages and uploaders via wrap-and-sort -ast
  * Normalize order of packages via wrap-and-sort -b

 -- Jeremy Bicha <email address hidden>  Sun, 11 Sep 2016 04:09:45 -0400

Upload details

Uploaded by:
Jeremy Bicha on 2016-09-12
Sponsored by:
Martin Pitt
Uploaded to:
Yakkety
Original maintainer:
Ubuntu Developers
Architectures:
any all
Section:
devel
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Yakkety release on 2016-09-12 main devel

Downloads

File Size SHA-256 Checksum
dbus_1.10.10.orig.tar.gz 1.9 MiB 9d8f1d069ab4d1a0255d7b400ea3bcef4430c42e729b1012abb2890e3f739a43
dbus_1.10.10-1ubuntu1.debian.tar.xz 62.7 KiB 8b7dae092ea7428b8c2f034f06daf70ed3fb17f80e6f323c6b03ee1631dfd41d
dbus_1.10.10-1ubuntu1.dsc 3.1 KiB 21cdd4315916fe06b83bdd28538bb27a7e727960a7624fcf0f10185db4f61005

Available diffs

View changes file

Binary packages built by this source

dbus: simple interprocess messaging system (daemon and utilities)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.

dbus-1-dbg: simple interprocess messaging system (debug symbols)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides support for debugging programs that use the core
 D-Bus shared library.
 .
 See the dbus package description for more information about D-Bus in general.

dbus-1-doc: simple interprocess messaging system (documentation)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the API documentation for D-Bus, as well as
 the protocol specification.
 .
 See the dbus description for more information about D-Bus in general.

dbus-dbgsym: debug symbols for package dbus

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.

dbus-tests: simple interprocess messaging system (test infrastructure)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides automated and manual tests for D-Bus, and the
 dbus-test-tool utility.
 .
 See the dbus package description for more information about D-Bus in general.

dbus-tests-dbgsym: debug symbols for package dbus-tests

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides automated and manual tests for D-Bus, and the
 dbus-test-tool utility.
 .
 See the dbus package description for more information about D-Bus in general.

dbus-udeb: simple interprocess messaging system (minimal runtime)

 D-Bus is a message bus, used for sending messages between applications.
 .
 This package is a minimal version of the dbus and dbus-x11 packages,
 for use in the Debian installer. It can run a session bus, but is not
 suitable for use as a system bus.

dbus-udeb-dbgsym: debug symbols for package dbus-udeb

 D-Bus is a message bus, used for sending messages between applications.
 .
 This package is a minimal version of the dbus and dbus-x11 packages,
 for use in the Debian installer. It can run a session bus, but is not
 suitable for use as a system bus.

dbus-user-session: simple interprocess messaging system (systemd --user integration)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 On systemd systems, this package opts in to the session model in which
 a user's session starts the first time they log in, and does not end
 until all their login sessions have ended. This model merges all
 parallel non-graphical login sessions (text mode, ssh, cron, etc.), and up
 to one graphical session, into a single "user-session" or "super-session"
 within which all background D-Bus services are shared.
 .
 Multiple graphical sessions per user are not currently supported in this
 mode; as a result, it is particularly suitable for gdm, which responds to
 requests to open a parallel graphical session by switching to the existing
 graphical session and unlocking it.
 .
 To retain dbus' traditional session semantics, in which login sessions
 are artificially isolated from each other, remove this package and install
 dbus-x11 instead.
 .
 See the dbus package description for more information about D-Bus in general.

dbus-x11: simple interprocess messaging system (X11 deps)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the dbus-launch utility which is necessary for
 packages using a D-Bus session bus.
 .
 See the dbus description for more information about D-Bus in general.

dbus-x11-dbgsym: debug symbols for package dbus-x11

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package contains the dbus-launch utility which is necessary for
 packages using a D-Bus session bus.
 .
 See the dbus description for more information about D-Bus in general.

libdbus-1-3: simple interprocess messaging system (library)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.

libdbus-1-3-dbgsym: debug symbols for package libdbus-1-3

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.

libdbus-1-3-udeb: simple interprocess messaging system (minimal library)

 D-Bus is a message bus, used for sending messages between applications.
 .
 This package is a minimal version of the libdbus-1-3 package,
 for use in the Debian installer.

libdbus-1-3-udeb-dbgsym: debug symbols for package libdbus-1-3-udeb

 D-Bus is a message bus, used for sending messages between applications.
 .
 This package is a minimal version of the libdbus-1-3 package,
 for use in the Debian installer.

libdbus-1-dev: simple interprocess messaging system (development headers)

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 See the dbus description for more information about D-Bus in general.

libdbus-1-dev-dbgsym: debug symbols for package libdbus-1-dev

 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 See the dbus description for more information about D-Bus in general.