-
alsa-utils (1.0.20-2ubuntu6) karmic; urgency=low
* debian/init: Revert behavior back to 1.0.20-2ubuntu3 as these other
checks were causing problems with storing volume (LP: #454265)
-- Mario Limonciello <email address hidden> Tue, 20 Oct 2009 01:41:24 -0500
-
alsa-utils (1.0.20-2ubuntu5) karmic; urgency=low
* debian/init: Don't do silly things with the PulseAudio check. Just
make sure that, in the stop target, we don't store levels for a card
that has already been stored and muted.
(LP: #449589, #450612, #450652)
-- Daniel T Chen <email address hidden> Tue, 13 Oct 2009 22:17:12 -0400
-
alsa-utils (1.0.20-2ubuntu4) karmic; urgency=low
* debian/init: Only restore ALSA volume settings via the initscript
if solely ALSA (e.g., no PulseAudio) is used
- LP: #432660, #447204, #447395, #447413
* debian/patches/:
+ move_asound_state_to_var.patch: Refresh
+ unset_pulse_internal.patch: Refresh
-- Daniel T Chen <email address hidden> Thu, 08 Oct 2009 18:05:35 -0400
-
alsa-utils (1.0.20-2ubuntu3) karmic; urgency=low
* debian/init: Mute "IEC958 Optical Raw" by default (LP: #408370)
-- Daniel T Chen <email address hidden> Thu, 27 Aug 2009 09:31:11 -0400
-
alsa-utils (1.0.20-2ubuntu2) karmic; urgency=low
* debian/patches/remove_alsaconf.patch: Since we don't ship alsaconf, remove
references to it from the build system, and remove alsaconf/po. This
ensures that alsaconf po files do not get shipped in the translations
tarball, as there is no pot file for alsaconf translations. (LP: #410699)
-- Luke Yelavich <email address hidden> Fri, 21 Aug 2009 10:15:56 +1000
-
alsa-utils (1.0.20-2ubuntu1) karmic; urgency=low
* Merge from debian unstable, remaining changes:
- debian/init:
+ wait until /usr/bin and /var/lib/alsa exist
+ only display an error when dealing with alsactl if there is no card
specified
+ Set sane level for 'Speaker' and 'Headphone', needed for Dell Mini 9
and Dell E series
+ ute PC Beep on hda cards that support it during initial volume setup
+ update lsb header to indicate no running of the script unless the
udev rule is run
+ Mute *Analog/Digital Control for Creative cards by default
+ Default Digital Input Source to be Digital Mic 1 so that users
with digital mic will be able to use it out of the box
+ Make use of lsb-functions/log calls
- debian/rules:
+ ship udev rules file in /lib/udev/rules.d
+ Do not install start symlinks for the alsa-utils init script, it gets
run from a udev rule
- debian/udev.script: do not use hotplug functions
- debian/README.init.cs4236: Include in /usr/share/doc/alsa-utils so that
users of snd-cs4236 (e.g., ThinkPad 600) can have audible sound
- debian/patches/unset_pulse_internal.patch: We don't want alsamixer to
show the pulse mixer by default, since it can be controlled from
pulseaudio itself.
- debian/patches/fix_misspelling_speaker-test_man_page.patch: Fix
misspelling in speaker-test(1)
- Set sane level for headphone 1 for Dell Studio XPS with 2.6.30.
alsa-utils (1.0.20-2) unstable; urgency=low
[ Elimar Riesebieter ]
* Added avr32 to supported archs.
* Removed mute_and_zero_levels_on_card "pcsp" in init file.
(closes: #533008, #523291)
* Initscript needs to depend on udev at Required-Start. Thanks Raphael
Geissert for the hint (closes: #534525).
* Bumped Standards-Version to 3.8.2. No changes.
-- Luke Yelavich <email address hidden> Fri, 03 Jul 2009 15:47:51 +1000
-
alsa-utils (1.0.20-1ubuntu1) karmic; urgency=low
* Merge from debian unstable, remaining changes:
- debian/init:
+ wait until /usr/bin and /var/lib/alsa exist
+ only display an error when dealing with alsactl if there is no card
specified
+ Set sane level for 'Speaker' and 'Headphone', needed for Dell Mini 9
and Dell E series
+ ute PC Beep on hda cards that support it during initial volume setup
+ update lsb header to indicate no running of the script unless the
udev rule is run
+ Mute *Analog/Digital Control for Creative cards by default
+ Default Digital Input Source to be Digital Mic 1 so that users
with digital mic will be able to use it out of the box
+ Make use of lsb-functions/log calls
- debian/rules:
+ ship udev rules file in /lib/udev/rules.d
+ Do not install start symlinks for the alsa-utils init script, it gets
run from a udev rule
- debian/udev.script: do not use hotplug functions
- debian/README.init.cs4236: Include in /usr/share/doc/alsa-utils so that
users of snd-cs4236 (e.g., ThinkPad 600) can have audible sound
- debian/patches/unset_pulse_internal.patch: We don't want alsamixer to
show the pulse mixer by default, since it can be controlled from
pulseaudio itself.
- debian/patches/fix_misspelling_speaker-test_man_page.patch: Fix
misspelling in speaker-test(1)
- Set sane level for headphone 1 for Dell Studio XPS with 2.6.30.
alsa-utils (1.0.20-1) unstable; urgency=low
* New upstream release
[ Elimar Riesebieter ]
* Delete /etc/alsa/modprobe-post-install.d/alsa-utils.
- Install udev config to /lib/udev/rules.d/80-alsa.rules
- Remove obsolete /etc/udev/alsa-utils.rules and the appropriate link in
/etc/udev/rules.d.
- Thanks for the hints Marco d'Itri. (closes: #521705)
* Bumped standard version to 3.8.1. No changes.
* Updated README.Debian. Removed the paragraph about non-udev systems.
* Cleaned rules. Removed modprobe-post-install stuff.
* Removed asoundconf and modprobe-post-install-part from debian dir.
[ Jordi Mallach ]
* Properly handle the removal of conffiles, also for changes in
recent uploads.
- steal code from udev's preinst to create rm_conffile() & mv_conffile().
- remove modprobe-postinstall files.
- move the modprobe.d files to the new .conf suffix.
* Don't use rm -v, no need to be verbose.
-- Luke Yelavich <email address hidden> Tue, 26 May 2009 22:29:51 +0200
-
alsa-utils (1.0.19-2ubuntu2) karmic; urgency=low
* debian/init: Set sane level for 'Headphone 1', which behavior
has changed on the Studio XPS w/ 2.6.30.
-- Mario Limonciello <email address hidden> Mon, 04 May 2009 14:05:19 -0500
-
alsa-utils (1.0.19-2ubuntu1) karmic; urgency=low
* Merge from debian unstable, remaining changes:
- debian/init:
+ wait until /usr/bin and /var/lib/alsa exist
+ only display an error when dealing with alsactl if there is no card
specified
+ Set sane level for 'Speaker' and 'Headphone', needed for Dell Mini 9
and Dell E series
+ ute PC Beep on hda cards that support it during initial volume setup
+ update lsb header to indicate no running of the script unless the
udev rule is run
= Mute *Analog/Digital Control for Creative cards by default
+ Default Digital Input Source to be Digital Mic 1 so that users
with digital mic will be able to use it out of the box
= Make use of lsb-functions/log calls
- debian/rules:
+ ship udev rules file in /lib/udev/rules.d
+ Do not install start symlinks for the alsa-utils init script, it gets
run from a udev rule
- debian/udev.script: do not use hotplug functions
- debian/postinst: remove old start symlink on upgrade
- debian/README.init.cs4236: Include in /usr/share/doc/alsa-utils so that
users of snd-cs4236 (e.g., ThinkPad 600) can have audible sound
- debian/patches/unset_pulse_internal.patch: We don't want alsamixer to
show the pulse mixer by default, since it can be controlled from
pulseaudio itself.
- debian/patches/fix_misspelling_speaker-test_man_page.patch: Fix
misspelling in speaker-test(1)
alsa-utils (1.0.19-2) unstable; urgency=low
[ Elimar Riesebieter ]
* Rename /etc/modprobe.d/sound to /etc/modprobe.d/sound.conf if exists.
(closes: #521695)
* Don't install /etc/alsa/modprobe-post-install.d/alsa-utils anymore.
(closes: #521705)
[ Jordi Mallach ]
* Add aseqnet_manpage_errors.patch, to remove an unknown "LO" section.
alsa-utils (1.0.19-1) unstable; urgency=low
* New upstream release (closes: #509176, #485661)
[ Elimar Riesebieter ]
* Get rid of asoundconf. (closes: #505089, #433134)
- Remove python dependencies (closes: #508563)
[ Jordi Mallach ]
* Add a NEWS file explaining the removal of alsaconf and asoundconf.
* Upload to unstable.
-- Luke Yelavich <email address hidden> Mon, 04 May 2009 16:56:13 +1000
-
alsa-utils (1.0.18-1ubuntu11) jaunty; urgency=low
* debian/init: Set sane level for 'Speaker' and 'Headphone',
too. Needed for Dell Mini 9 and Dell E series.
-- Daniel T Chen <email address hidden> Sat, 04 Apr 2009 18:06:53 -0400