Unusual Boot Messages (hde: lost interrupt)

Bug #87477 reported by halw
4
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Incomplete
Undecided
Unassigned
linux-source-2.6.20 (Ubuntu)
Won't Fix
Undecided
Chuck Short

Bug Description

Feisty Herd 4, Asus P4P800-E Deluxe mobo, 2 seagate sata hds, 1GB memory, Plextor 716A DVDRW, Plextor Premium CDRW, Intel P4 Prescott 3.2 MHz CPU, ATI 9600se GPU

Contents from dmesg --

ubuntu@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.20-8-generic (root@vernadsky) (gcc version 4.1.2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 05:18:42 UTC 2007 (Ubuntu 2.6.20-8.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003feb0000 end: 000000003ffb0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffb0000 size: 0000000000010000 end: 000000003ffc0000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 0000000000030000 end: 000000003fff0000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000010000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32433 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000fad80
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x09000505 MSFT 0x00000097) @ 0x3ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x09000505 MSFT 0x00000097) @ 0x3ffb0200
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x09000505 MSFT 0x00000097) @ 0x3ffb0390
[ 0.000000] ACPI: OEMB (v001 A M I OEMBIOS 0x09000505 MSFT 0x00000097) @ 0x3ffc0040
[ 0.000000] ACPI: DSDT (v001 A0030 A0030011 0x00000011 INTL 0x02002026) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
[ 0.000000] Detected 3198.858 MHz processor.
[ 39.292485] Built 1 zonelists. Total pages: 260017
[ 39.292489] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/kubuntu.seed boot=casper initrd=/casper/initrd.gz
[ 39.292650] mapped APIC to ffffd000 (fee00000)
[ 39.292653] mapped IOAPIC to ffffc000 (fec00000)
[ 39.292656] Enabling fast FPU save and restore... done.
[ 39.292658] Enabling unmasked SIMD FPU exception support... done.
[ 39.292667] Initializing CPU#0
[ 39.292728] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 39.293784] Console: colour VGA+ 80x25
[ 39.296216] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 39.296601] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 39.315300] Memory: 1028348k/1048256k available (1979k kernel code, 19296k reserved, 882k data, 324k init, 130752k highmem)
[ 39.315365] virtual kernel memory layout:
[ 39.315366] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 39.315367] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 39.315368] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 39.315369] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 39.315370] .init : 0xc03d1000 - 0xc0422000 ( 324 kB)
[ 39.315371] .data : 0xc02eecb4 - 0xc03cb6d4 ( 882 kB)
[ 39.315372] .text : 0xc0100000 - 0xc02eecb4 (1979 kB)
[ 39.315701] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 39.392691] Calibrating delay using timer specific routine.. 6401.69 BogoMIPS (lpj=12803380)
[ 39.392813] Security Framework v1.0.0 initialized
[ 39.392859] SELinux: Disabled at boot.
[ 39.392915] Mount-cache hash table entries: 512
[ 39.393085] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 39.393093] monitor/mwait feature present.
[ 39.393135] using mwait in idle threads.
[ 39.393181] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 39.393255] CPU: L2 cache: 1024K
[ 39.393296] CPU: Physical Processor ID: 0
[ 39.393338] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[ 39.393360] Checking 'hlt' instruction... OK.
[ 39.408812] SMP alternatives: switching to UP code
[ 39.409121] ACPI: Core revision 20060707
[ 39.410995] CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[ 39.411120] SMP alternatives: switching to SMP code
[ 39.411202] Booting processor 1/1 eip 3000
[ 39.421585] Initializing CPU#1
[ 39.500644] Calibrating delay using timer specific routine.. 6397.39 BogoMIPS (lpj=12794790)
[ 39.500653] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 39.500659] monitor/mwait feature present.
[ 39.500666] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 39.500668] CPU: L2 cache: 1024K
[ 39.500671] CPU: Physical Processor ID: 0
[ 39.500673] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[ 39.500936] CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[ 39.501331] Total of 2 processors activated (12799.08 BogoMIPS).
[ 39.501501] ENABLING IO-APIC IRQs
[ 39.501715] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 39.648588] checking TSC synchronization across 2 CPUs: passed.
[ 0.003968] Brought up 2 CPUs
[ 0.118076] migration_cost=66
[ 0.118452] Booting paravirtualized kernel on bare hardware
[ 0.118569] Time: 20:32:52 Date: 01/23/107
[ 0.118641] NET: Registered protocol family 16
[ 0.118767] EISA bus registered
[ 0.118811] ACPI: bus type pci registered
[ 0.118909] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
[ 0.118953] PCI: Using configuration type 1
[ 0.118994] Setting up standard PCI resources
[ 0.133244] ACPI: Interpreter enabled
[ 0.133288] ACPI: Using IOAPIC for interrupt routing
[ 0.134444] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.134492] PCI: Probing PCI hardware (bus 00)
[ 0.135082] PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.135129] PCI quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.135431] Boot video device is 0000:01:00.0
[ 0.135683] PCI: Transparent bridge - 0000:00:1e.0
[ 0.135749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.144928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.152187] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.152839] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.153489] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.154138] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.154790] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.155439] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.156171] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.156858] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.157370] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.157422] pnp: PnP ACPI init
[ 0.162658] pnp: PnP ACPI: found 15 devices
[ 0.162704] ASUS P4P800 detected. Disabling PnPBIOS
[ 0.162746] PnPBIOS: Disabled
[ 0.162834] PCI: Using ACPI for IRQ routing
[ 0.162878] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.168050] pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
[ 0.168095] pnp: 00:0b: ioport range 0x290-0x297 has been reserved
[ 0.168439] PCI: Bridge: 0000:00:01.0
[ 0.168482] IO window: c000-cfff
[ 0.168526] MEM window: fe900000-fe9fffff
[ 0.168569] PREFETCH window: b7f00000-f7efffff
[ 0.168614] PCI: Bridge: 0000:00:1e.0
[ 0.168656] IO window: d000-dfff
[ 0.168700] MEM window: fea00000-feafffff
[ 0.168744] PREFETCH window: disabled.
[ 0.168800] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.168832] NET: Registered protocol family 2
[ 0.215932] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.216113] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.216702] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.217081] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.217125] TCP reno registered
[ 0.228024] checking if image is initramfs... it is
[ 0.711660] Freeing initrd memory: 6605k freed
[ 0.712278] audit: initializing netlink socket (disabled)
[ 0.712334] audit(1172262773.148:1): initialized
[ 0.712475] highmem bounce pool size: 64 pages
[ 0.712603] VFS: Disk quotas dquot_6.5.1
[ 0.712664] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.712752] io scheduler noop registered
[ 0.712826] io scheduler anticipatory registered
[ 0.712899] io scheduler deadline registered
[ 0.712982] io scheduler cfq registered (default)
[ 0.713371] isapnp: Scanning for PnP cards...
[ 1.064944] isapnp: No Plug & Play device found
[ 1.090514] Real Time Clock Driver v1.12ac
[ 1.090607] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.090769] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.090940] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.091571] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.091859] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.092105] mice: PS/2 mouse device common for all mice
[ 1.092756] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.092902] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.092948] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.093230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.096159] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.096206] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.096812] EISA: Probing bus 0 at eisa.0
[ 1.096892] EISA: Detected 0 cards.
[ 1.127001] TCP cubic registered
[ 1.127048] NET: Registered protocol family 1
[ 1.127094] NET: Registered protocol family 8
[ 1.127136] NET: Registered protocol family 20
[ 1.127214] Starting balanced_irq
[ 1.127261] Using IPI No-Shortcut mode
[ 1.127376] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.127479] Time: tsc clocksource has been installed.
[ 1.127546] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.127819] Magic number: 11:303:549
[ 1.128142] Freeing unused kernel memory: 324k freed
[ 1.307069] Capability LSM initialized
[ 1.759994] usbcore: registered new interface driver usbfs
[ 1.760070] usbcore: registered new interface driver hub
[ 1.760150] usbcore: registered new device driver usb
[ 1.761432] USB Universal Host Controller Interface driver v3.0
[ 1.761542] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 1.761639] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.761644] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.761804] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.761881] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[ 1.762062] usb usb1: configuration #1 chosen from 1 choice
[ 1.762141] hub 1-0:1.0: USB hub found
[ 1.762192] hub 1-0:1.0: 2 ports detected
[ 1.867329] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[ 1.867438] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.867444] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.867517] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.867612] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ef20
[ 1.867840] usb usb2: configuration #1 chosen from 1 choice
[ 1.867955] hub 2-0:1.0: USB hub found
[ 1.868019] hub 2-0:1.0: 2 ports detected
[ 1.889778] ieee1394: Initialized config rom entry `ip1394'
[ 1.975257] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.975358] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.975364] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.975446] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.975537] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[ 1.975718] usb usb3: configuration #1 chosen from 1 choice
[ 1.975803] hub 3-0:1.0: USB hub found
[ 1.975854] hub 3-0:1.0: 2 ports detected
[ 2.083154] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.083253] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.083259] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.083339] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.083423] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[ 2.083594] usb usb4: configuration #1 chosen from 1 choice
[ 2.083672] hub 4-0:1.0: USB hub found
[ 2.083722] hub 4-0:1.0: 2 ports detected
[ 2.192856] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
[ 2.192962] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.192967] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.193061] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.193154] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.193203] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[ 2.193215] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebffc00
[ 2.197134] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.197306] usb usb5: configuration #1 chosen from 1 choice
[ 2.197389] hub 5-0:1.0: USB hub found
[ 2.197439] hub 5-0:1.0: 8 ports detected
[ 2.219031] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 2.303200] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.303335] skge 1.9 addr 0xfeaf8000 irq 20 chip Yukon rev 1
[ 2.303505] skge eth0: addr 00:30:bd:73:29:e3
[ 2.303572] ICH5: IDE controller at PCI slot 0000:00:1f.1
[ 2.303627] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
[ 2.303676] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.303778] ICH5: chipset revision 2
[ 2.303825] ICH5: not 100% native mode: will probe irqs later
[ 2.303880] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio
[ 2.304008] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
[ 2.304128] Probing IDE interface ide0...
[ 2.874708] Probing IDE interface ide1...
[ 2.974660] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 3.172971] usb 2-2: configuration #1 chosen from 1 choice
[ 3.614518] hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
[ 4.402170] hdd: PLEXTOR CD-R PREMIUM, ATAPI CD/DVD-ROM drive
[ 4.462219] ide1 at 0x170-0x177,0x376 on irq 15
[ 4.462380] ICH5-SATA: IDE controller at PCI slot 0000:00:1f.2
[ 4.462439] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 4.462535] ICH5-SATA: chipset revision 2
[ 4.462587] ICH5-SATA: 100% native mode on irq 18
[ 4.462638] ide2: BM-DMA at 0xef60-0xef67, BIOS settings: hde:DMA, hdf:pio
[ 4.462765] ide3: BM-DMA at 0xef68-0xef6f, BIOS settings: hdg:DMA, hdh:pio
[ 4.462887] Probing IDE interface ide2...
[ 4.754023] hde: ST3160023AS, ATA DISK drive
[ 5.429944] ide2 at 0xefe0-0xefe7,0xefae on irq 18
[ 5.430060] Probing IDE interface ide3...
[ 5.721597] hdg: ST3160811AS, ATA DISK drive
[ 6.061300] hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
[ 6.229226] hdh: probing with STATUS(0x00) instead of ALTSTATUS(0x50)
[ 6.397370] ide3 at 0xefa0-0xefa7,0xefaa on irq 18
[ 6.397711] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 6.449029] SCSI subsystem initialized
[ 6.451537] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.456654] libata version 2.00 loaded.
[ 6.477899] hde: max request size: 512KiB
[ 6.479666] hde: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[ 6.480079] hde: cache flushes supported
[ 6.480256] hde:<6>hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
[ 6.484864] Uniform CD-ROM driver Revision: 3.20
[ 6.489660] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
[ 6.491865] hde1 hde2 < hde5 > hde3 hde4
[ 6.511898] hdg: max request size: 512KiB
[ 6.543327] hdg: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[ 6.567747] hdg: cache flushes supported
[ 6.567848] hdg: hdg1 hdg2 < hdg5 >
[ 6.989112] kjournald starting. Commit interval 5 seconds
[ 6.989185] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.690557] irq 18: nobody cared (try booting with the "irqpoll" option)
[ 7.690614] [<c0153f54>] __report_bad_irq+0x24/0x80
[ 7.690695] [<c015420e>] note_interrupt+0x25e/0x290
[ 7.690772] [<c0153480>] handle_IRQ_event+0x30/0x60
[ 7.690848] [<c0154b2d>] handle_fasteoi_irq+0xbd/0xd0
[ 7.690924] [<c0105b50>] do_IRQ+0x40/0x80
[ 7.691000] [<c0104213>] common_interrupt+0x23/0x30
[ 7.691076] [<c01012b6>] mwait_idle_with_hints+0x46/0x60
[ 7.691152] [<c0101409>] cpu_idle+0x49/0xd0
[ 7.691227] [<c03d17ef>] start_kernel+0x35f/0x420
[ 7.691303] [<c03d1230>] unknown_bootoption+0x0/0x260
[ 7.691379] =======================
[ 7.691420] handlers:
[ 7.691460] [<f887eee0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 7.691579] [<c025eea0>] (ide_intr+0x0/0x1f0)
[ 7.691687] [<c025eea0>] (ide_intr+0x0/0x1f0)
[ 7.691793] Disabling IRQ #18
[ 7.736724] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800008de4a6]
[ 8.331557] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 8.346902] ISO 9660 Extensions: RRIP_1991A
[ 8.370296] Registering unionfs 20060916-2203
[ 8.370348] unionfs: debugging is not enabled
[ 8.377535] loop: loaded (max 8 devices)
[ 8.487326] squashfs: version 3.1 (2006/08/19) Phillip Lougher
[ 65.507125] hde: lost interrupt
[ 65.511125] hdg: lost interrupt
[ 85.514317] hde: dma_timer_expiry: dma status == 0x24
[ 85.518322] hdg: dma_timer_expiry: dma status == 0x24
[ 95.509916] hde: DMA interrupt recovery
[ 95.509959] hde: lost interrupt
[ 95.513922] hdg: DMA interrupt recovery
[ 95.513965] hdg: lost interrupt
[ 115.501116] hde: dma_timer_expiry: dma status == 0x24
[ 115.505122] hdg: dma_timer_expiry: dma status == 0x24
[ 125.496716] hde: DMA interrupt recovery
[ 125.496758] hde: lost interrupt
[ 125.500722] hdg: DMA interrupt recovery
[ 125.500764] hdg: lost interrupt
[ 145.487916] hde: dma_timer_expiry: dma status == 0x24
[ 145.491922] hdg: dma_timer_expiry: dma status == 0x24
[ 155.483516] hde: DMA interrupt recovery
[ 155.483558] hde: lost interrupt
[ 155.487522] hdg: DMA interrupt recovery
[ 155.487564] hdg: lost interrupt
[ 175.474716] hde: dma_timer_expiry: dma status == 0x24
[ 175.478722] hdg: dma_timer_expiry: dma status == 0x24
[ 185.470316] hde: DMA interrupt recovery
[ 185.470358] hde: lost interrupt
[ 185.474322] hdg: DMA interrupt recovery
[ 185.474365] hdg: lost interrupt
[ 205.461516] hde: dma_timer_expiry: dma status == 0x24
[ 205.465522] hdg: dma_timer_expiry: dma status == 0x24
[ 215.457122] hde: DMA interrupt recovery
[ 215.457165] hde: lost interrupt
[ 215.461135] hdg: DMA interrupt recovery
[ 215.461190] hdg: lost interrupt
[ 235.448318] hde: dma_timer_expiry: dma status == 0x24
[ 235.452323] hdg: dma_timer_expiry: dma status == 0x24
[ 245.447915] hde: DMA interrupt recovery
[ 245.447963] hde: lost interrupt
[ 245.451922] hdg: DMA interrupt recovery
[ 245.451966] hdg: lost interrupt
[ 251.140747] skge eth0: enabling interface
[ 252.599920] iTCO_vendor_support: vendor-support=0
[ 252.619870] input: PC Speaker as /class/input/input1
[ 252.670553] Floppy drive(s): fd0 is 1.44M
[ 252.692495] FDC 0 is a post-1991 82077
[ 252.744823] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 252.761403] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 252.771534] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 252.771700] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 252.771799] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 252.808596] skge eth0: Link is up at 100 Mbps, full duplex, flow control none
[ 252.822471] intel_rng: FWH not detected
[ 252.953992] NET: Registered protocol family 17
[ 253.104956] Linux agpgart interface v0.101 (c) Dave Jones
[ 253.376676] agpgart: Detected an Intel 865 Chipset.
[ 253.380009] agpgart: AGP aperture is 64M @ 0xf8000000
[ 253.458604] parport: PnPBIOS parport detected.
[ 253.458759] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 253.813346] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x2311
[ 253.813428] usbcore: registered new interface driver usblp
[ 253.813480] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 253.948334] input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
[ 254.179855] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
[ 254.179984] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[ 254.503943] intel8x0_measure_ac97_clock: measured 58650 usecs
[ 254.503992] intel8x0: clocking to 48000
[ 255.444978] NET: Registered protocol family 10
[ 255.445147] lo: Disabled Privacy Extensions
[ 265.443114] hde: dma_timer_expiry: dma status == 0x24
[ 265.447119] hdg: dma_timer_expiry: dma status == 0x24
[ 265.707003] eth0: no IPv6 routers present
[ 275.438714] hde: DMA interrupt recovery
[ 275.438759] hde: lost interrupt
[ 275.442719] hdg: DMA interrupt recovery
[ 275.442763] hdg: lost interrupt
[ 295.429914] hde: dma_timer_expiry: dma status == 0x24
[ 295.433919] hdg: dma_timer_expiry: dma status == 0x24
[ 305.425513] hde: DMA interrupt recovery
[ 305.425556] hde: lost interrupt
[ 305.429519] hdg: DMA interrupt recovery
[ 305.429561] hdg: lost interrupt
[ 325.416713] hde: dma_timer_expiry: dma status == 0x24
[ 325.420719] hdg: dma_timer_expiry: dma status == 0x24
[ 335.412312] hde: DMA interrupt recovery
[ 335.412356] hde: lost interrupt
[ 335.416319] hdg: DMA interrupt recovery
[ 335.416362] hdg: lost interrupt
[ 355.403513] hde: dma_timer_expiry: dma status == 0x24
[ 355.407518] hdg: dma_timer_expiry: dma status == 0x24
[ 365.399112] hde: DMA interrupt recovery
[ 365.399155] hde: lost interrupt
[ 365.403119] hdg: DMA interrupt recovery
[ 365.403161] hdg: lost interrupt
[ 385.390313] hde: dma_timer_expiry: dma status == 0x24
[ 385.394319] hdg: dma_timer_expiry: dma status == 0x24
[ 395.385913] hde: DMA interrupt recovery
[ 395.385955] hde: lost interrupt
[ 395.389919] hdg: DMA interrupt recovery
[ 395.389961] hdg: lost interrupt
[ 415.377113] hde: dma_timer_expiry: dma status == 0x24
[ 415.381119] hdg: dma_timer_expiry: dma status == 0x24
[ 425.372712] hde: DMA interrupt recovery
[ 425.372755] hde: lost interrupt
[ 425.376719] hdg: DMA interrupt recovery
[ 425.376762] hdg: lost interrupt
[ 445.363914] hde: dma_timer_expiry: dma status == 0x24
[ 445.367919] hdg: dma_timer_expiry: dma status == 0x24
[ 455.359514] hde: DMA interrupt recovery
[ 455.359567] hde: lost interrupt
[ 455.363520] hdg: DMA interrupt recovery
[ 455.363563] hdg: lost interrupt
[ 455.471521] fuse init (API version 7.8)
[ 462.626273] input: Power Button (FF) as /class/input/input3
[ 462.626565] ACPI: Power Button (FF) [PWRF]
[ 462.628107] input: Power Button (CM) as /class/input/input4
[ 462.628465] ACPI: Power Button (CM) [PWRB]
[ 463.207906] No dock devices found.
[ 463.234932] Using specific hotkey driver
[ 463.692509] ibm_acpi: ec object not found
[ 464.940378] lp0: using parport0 (interrupt-driven).
[ 464.979805] ppdev: user-space parallel port driver
[ 469.040577] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 469.040583] apm: disabled - APM is not SMP safe.
[ 475.350714] hde: dma_timer_expiry: dma status == 0x24
[ 475.354720] hdg: dma_timer_expiry: dma status == 0x24
[ 485.346314] hde: DMA interrupt recovery
[ 485.346320] hde: lost interrupt
[ 485.350320] hdg: DMA interrupt recovery
[ 485.350324] hdg: lost interrupt
[ 505.341512] hde: dma_timer_expiry: dma status == 0x24
[ 505.345518] hdg: dma_timer_expiry: dma status == 0x24
[ 515.337113] hde: DMA interrupt recovery
[ 515.337119] hde: lost interrupt
[ 515.341118] hdg: DMA interrupt recovery
[ 515.341123] hdg: lost interrupt
[ 516.238442] Bluetooth: Core ver 2.11
[ 516.238515] NET: Registered protocol family 31
[ 516.238519] Bluetooth: HCI device and connection manager initialized
[ 516.238523] Bluetooth: HCI socket layer initialized
[ 516.266581] Bluetooth: L2CAP ver 2.8
[ 516.266588] Bluetooth: L2CAP socket layer initialized
[ 516.659256] Bluetooth: RFCOMM socket layer initialized
[ 516.659271] Bluetooth: RFCOMM TTY layer initialized
[ 516.659275] Bluetooth: RFCOMM ver 1.8
[ 519.728079] [drm] Initialized drm 1.1.0 20060810
[ 519.760708] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 519.761408] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 521.576272] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 521.576296] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 521.576335] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[ 531.705912] eth0: no IPv6 routers present
[ 535.328312] hde: dma_timer_expiry: dma status == 0x24
[ 535.332319] hdg: dma_timer_expiry: dma status == 0x24
[ 537.863536] [drm] Setting GART location based on new memory map
[ 537.863547] [drm] Loading R300 Microcode
[ 537.863592] [drm] writeback test succeeded in 1 usecs
[ 545.323914] hde: DMA interrupt recovery
[ 545.323921] hde: lost interrupt
[ 545.327918] hdg: DMA interrupt recovery
[ 545.327923] hdg: lost interrupt
[ 565.315113] hde: dma_timer_expiry: dma status == 0x24
[ 565.319120] hdg: dma_timer_expiry: dma status == 0x24
[ 575.310712] hde: DMA interrupt recovery
[ 575.310719] hde: lost interrupt
[ 575.314720] hdg: DMA interrupt recovery
[ 575.314725] hdg: lost interrupt
[ 595.301913] hde: dma_timer_expiry: dma status == 0x24
[ 595.305919] hdg: dma_timer_expiry: dma status == 0x24
[ 605.297513] hde: DMA interrupt recovery
[ 605.297519] hde: lost interrupt
[ 605.301518] hdg: DMA interrupt recovery
[ 605.301523] hdg: lost interrupt
[ 625.288712] hde: dma_timer_expiry: dma status == 0x24
[ 625.292718] hdg: dma_timer_expiry: dma status == 0x24
[ 635.284312] hde: DMA interrupt recovery
[ 635.284319] hde: lost interrupt
[ 635.288318] hdg: DMA interrupt recovery
[ 635.288323] hdg: lost interrupt
[ 655.275512] hde: dma_timer_expiry: dma status == 0x24
[ 655.279518] hdg: dma_timer_expiry: dma status == 0x24
[ 665.271112] hde: DMA interrupt recovery
[ 665.271118] hde: lost interrupt
[ 665.275119] hdg: DMA interrupt recovery
[ 665.275123] hdg: lost interrupt
[ 685.262313] hde: dma_timer_expiry: dma status == 0x24
[ 685.266318] hdg: dma_timer_expiry: dma status == 0x24
[ 695.257913] hde: DMA interrupt recovery
[ 695.257919] hde: lost interrupt
[ 695.261920] hdg: DMA interrupt recovery
[ 695.261925] hdg: lost interrupt
[ 715.249112] hde: dma_timer_expiry: dma status == 0x24
[ 715.253118] hdg: dma_timer_expiry: dma status == 0x24
[ 725.244712] hde: DMA interrupt recovery
[ 725.244718] hde: lost interrupt
[ 725.248718] hdg: DMA interrupt recovery
[ 725.248723] hdg: lost interrupt
[ 745.239911] hde: dma_timer_expiry: dma status == 0x24
[ 745.243916] hdg: dma_timer_expiry: dma status == 0x24
[ 755.235510] hde: DMA interrupt recovery
[ 755.235516] hde: lost interrupt
[ 755.239517] hdg: DMA interrupt recovery
[ 755.239521] hdg: lost interrupt
[ 775.226710] hde: dma_timer_expiry: dma status == 0x24
[ 775.230717] hdg: dma_timer_expiry: dma status == 0x24
[ 785.222311] hde: DMA interrupt recovery
[ 785.222317] hde: lost interrupt
[ 785.226317] hdg: DMA interrupt recovery
[ 785.226321] hdg: lost interrupt
[ 805.213510] hde: dma_timer_expiry: dma status == 0x24
[ 805.217516] hdg: dma_timer_expiry: dma status == 0x24
[ 815.209111] hde: DMA interrupt recovery
[ 815.209118] hde: lost interrupt
[ 815.213117] hdg: DMA interrupt recovery
[ 815.213121] hdg: lost interrupt
[ 835.200312] hde: dma_timer_expiry: dma status == 0x24
[ 835.204317] hdg: dma_timer_expiry: dma status == 0x24
[ 845.195910] hde: DMA interrupt recovery
[ 845.195916] hde: lost interrupt
[ 845.199918] hdg: DMA interrupt recovery
[ 845.199923] hdg: lost interrupt
[ 865.187115] hde: dma_timer_expiry: dma status == 0x24
[ 865.191116] hdg: dma_timer_expiry: dma status == 0x24
[ 875.182713] hde: DMA interrupt recovery
[ 875.182720] hde: lost interrupt
[ 875.186717] hdg: DMA interrupt recovery
[ 875.186723] hdg: lost interrupt
[ 895.173911] hde: dma_timer_expiry: dma status == 0x24
[ 895.177917] hdg: dma_timer_expiry: dma status == 0x24
[ 905.169511] hde: DMA interrupt recovery
[ 905.169517] hde: lost interrupt
[ 905.173517] hdg: DMA interrupt recovery
[ 905.173521] hdg: lost interrupt
[ 925.160710] hde: dma_timer_expiry: dma status == 0x24
[ 925.164716] hdg: dma_timer_expiry: dma status == 0x24
[ 935.156310] hde: DMA interrupt recovery
[ 935.156316] hde: lost interrupt
[ 935.160317] hdg: DMA interrupt recovery
[ 935.160321] hdg: lost interrupt
[ 955.147511] hde: dma_timer_expiry: dma status == 0x24
[ 955.151517] hdg: dma_timer_expiry: dma status == 0x24
[ 965.143111] hde: DMA interrupt recovery
[ 965.143117] hde: lost interrupt
[ 965.147117] hdg: DMA interrupt recovery
[ 965.147121] hdg: lost interrupt
[ 985.138309] hde: dma_timer_expiry: dma status == 0x24
[ 985.142315] hdg: dma_timer_expiry: dma status == 0x24
[ 995.133909] hde: DMA interrupt recovery
[ 995.133915] hde: lost interrupt
[ 995.137917] hdg: DMA interrupt recovery
[ 995.137922] hdg: lost interrupt
[ 1015.125109] hde: dma_timer_expiry: dma status == 0x24
[ 1015.129115] hdg: dma_timer_expiry: dma status == 0x24
[ 1025.120709] hde: DMA interrupt recovery
[ 1025.120715] hde: lost interrupt
[ 1025.124715] hdg: DMA interrupt recovery
[ 1025.124720] hdg: lost interrupt
[ 1045.111910] hde: dma_timer_expiry: dma status == 0x24
[ 1045.115915] hdg: dma_timer_expiry: dma status == 0x24
[ 1055.107508] hde: DMA interrupt recovery
[ 1055.107514] hde: lost interrupt
[ 1055.111515] hdg: DMA interrupt recovery
[ 1055.111519] hdg: lost interrupt
[ 1075.098709] hde: dma_timer_expiry: dma status == 0x24
[ 1075.102715] hdg: dma_timer_expiry: dma status == 0x24
[ 1085.094309] hde: DMA interrupt recovery
[ 1085.094315] hde: lost interrupt
[ 1085.098315] hdg: DMA interrupt recovery
[ 1085.098319] hdg: lost interrupt
[ 1105.085509] hde: dma_timer_expiry: dma status == 0x24
[ 1105.089515] hdg: dma_timer_expiry: dma status == 0x24
[ 1115.081109] hde: DMA interrupt recovery
[ 1115.081115] hde: lost interrupt
[ 1115.085115] hdg: DMA interrupt recovery
[ 1115.085119] hdg: lost interrupt
[ 1135.072309] hde: dma_timer_expiry: dma status == 0x24
[ 1145.067909] hde: DMA interrupt recovery
[ 1145.067914] hde: lost interrupt
[ 1145.071906] hdg: lost interrupt
[ 1165.059109] hde: dma_timer_expiry: dma status == 0x24
[ 1175.054709] hde: DMA interrupt recovery
[ 1175.054714] hde: lost interrupt
[ 1195.045909] hde: dma_timer_expiry: dma status == 0x24
[ 1205.041509] hde: DMA interrupt recovery
[ 1205.041514] hde: lost interrupt
[ 1225.036707] hde: dma_timer_expiry: dma status == 0x24
[ 1235.032307] hde: DMA interrupt recovery
[ 1235.032312] hde: lost interrupt
[ 1255.023507] hde: dma_timer_expiry: dma status == 0x24
[ 1265.019107] hde: DMA interrupt recovery
[ 1265.019112] hde: lost interrupt
[ 1285.010307] hde: dma_timer_expiry: dma status == 0x24
[ 1295.005907] hde: DMA interrupt recovery
[ 1295.005912] hde: lost interrupt
[ 1314.997107] hde: dma_timer_expiry: dma status == 0x24
[ 1324.992707] hde: DMA interrupt recovery
[ 1324.992713] hde: lost interrupt
[ 1344.983907] hde: dma_timer_expiry: dma status == 0x24
[ 1354.979507] hde: DMA interrupt recovery
[ 1354.979512] hde: lost interrupt
[ 1374.970707] hde: dma_timer_expiry: dma status == 0x24
[ 1384.966307] hde: DMA interrupt recovery
[ 1384.966313] hde: lost interrupt
[ 1404.957507] hde: dma_timer_expiry: dma status == 0x24
[ 1414.953107] hde: DMA interrupt recovery
[ 1414.953112] hde: lost interrupt
[ 1434.944307] hde: dma_timer_expiry: dma status == 0x24
[ 1444.939907] hde: DMA interrupt recovery
[ 1444.939912] hde: lost interrupt
[ 1464.931107] hde: dma_timer_expiry: dma status == 0x24
[ 1474.930705] hde: DMA interrupt recovery
[ 1474.930711] hde: lost interrupt
[ 1494.921905] hde: dma_timer_expiry: dma status == 0x24
[ 1504.917505] hde: DMA interrupt recovery
[ 1504.917511] hde: lost interrupt
[ 1524.908705] hde: dma_timer_expiry: dma status == 0x24
[ 1534.904305] hde: DMA interrupt recovery
[ 1534.904311] hde: lost interrupt
[ 1554.895505] hde: dma_timer_expiry: dma status == 0x24
[ 1564.891105] hde: DMA interrupt recovery
[ 1564.891111] hde: lost interrupt
[ 1584.882305] hde: dma_timer_expiry: dma status == 0x24
[ 1594.877905] hde: DMA interrupt recovery
[ 1594.877910] hde: lost interrupt
[ 1614.869105] hde: dma_timer_expiry: dma status == 0x24
[ 1624.864705] hde: DMA interrupt recovery
[ 1624.864711] hde: lost interrupt
[ 1644.855905] hde: dma_timer_expiry: dma status == 0x24
[ 1654.851505] hde: DMA interrupt recovery
[ 1654.851511] hde: lost interrupt
[ 1674.842706] hde: dma_timer_expiry: dma status == 0x24
[ 1684.838305] hde: DMA interrupt recovery
[ 1684.838311] hde: lost interrupt
[ 1704.829506] hde: dma_timer_expiry: dma status == 0x24
[ 1714.829104] hde: DMA interrupt recovery
[ 1714.829110] hde: lost interrupt
[ 1734.824302] hde: dma_timer_expiry: dma status == 0x24
[ 1744.819901] hde: DMA interrupt recovery
[ 1744.819907] hde: lost interrupt
[ 1764.811103] hde: dma_timer_expiry: dma status == 0x24
[ 1774.806702] hde: DMA interrupt recovery
[ 1774.806709] hde: lost interrupt
[ 1794.797908] hde: dma_timer_expiry: dma status == 0x24
[ 1804.793503] hde: DMA interrupt recovery
[ 1804.793509] hde: lost interrupt
[ 1824.784702] hde: dma_timer_expiry: dma status == 0x24
[ 1834.780302] hde: DMA interrupt recovery
[ 1834.780308] hde: lost interrupt
[ 1854.771502] hde: dma_timer_expiry: dma status == 0x24
[ 1864.767103] hde: DMA interrupt recovery
[ 1864.767110] hde: lost interrupt
[ 1884.758304] hde: dma_timer_expiry: dma status == 0x24
[ 1894.753902] hde: DMA interrupt recovery
[ 1894.753907] hde: lost interrupt
[ 1914.745102] hde: dma_timer_expiry: dma status == 0x24
[ 1924.740702] hde: DMA interrupt recovery
[ 1924.740708] hde: lost interrupt
[ 1944.731909] hde: dma_timer_expiry: dma status == 0x24
[ 1954.727503] hde: DMA interrupt recovery
[ 1954.727509] hde: lost interrupt
[ 1974.722701] hde: dma_timer_expiry: dma status == 0x24
[ 1984.718309] hde: DMA interrupt recovery
[ 1984.718315] hde: lost interrupt
[ 2014.709104] hde: lost interrupt
ubuntu@ubuntu:~$

Revision history for this message
Chuck Short (zulcss) wrote :

Have you tried booting with the irqpoll option?

Changed in linux-source-2.6.20:
assignee: nobody → zulcss
status: Unconfirmed → Needs Info
Revision history for this message
halw (wolfehl) wrote :
Download full text (24.4 KiB)

"irqpoll" boot option seems to have eliminated some messages and allowed for quicker booting from live cd.

Following dmesg result using irqpoll:

ubuntu@ubuntu:~$ dmesg
[ 0.000000] Linux version 2.6.20-8-generic (root@vernadsky) (gcc version 4.1.
2 20070129 (prerelease) (Ubuntu 4.1.1-31ubuntu2)) #2 SMP Tue Feb 13 05:18:42 UTC
 2007 (Ubuntu 2.6.20-8.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009fc00 en
d: 000000000009fc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009fc00 size: 0000000000000400 en
d: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e8000 size: 0000000000018000 en
d: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003feb0000 en
d: 000000003ffb0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003ffb0000 size: 0000000000010000 en
d: 000000003ffc0000 type: 3
[ 0.000000] copy_e820_map() start: 000000003ffc0000 size: 0000000000030000 en
d: 000000003fff0000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000010000 en
d: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ffb80000 size: 0000000000480000 en
d: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 262064) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262064
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262064
[ 0.000000] On node 0 totalpages: 262064
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32433 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f
ad80
[ 0.000000] ACPI: RSDT (v001 A M I OEMRSDT 0x09000505 MSFT 0x00000097) @ 0x
3ffb0000
[ 0.000000] ACPI: FADT (v002 A M I OEMFACP 0x09000505 MSFT 0x0000009...

Revision history for this message
Shane R. Spencer (whardier) wrote :

I am having the same issue. I am attaching lshw/lsmod/dmesg reports.

The lshw is from edgy.

This is a Dell Precision 670 with a defaulted bios (Rev A07) and hyperthreading turned on. No SATA raid enabled in bios.

For some reason it is trying to probe each SATA port as PATA with a master and slave. Its detecting the seagate drives as master but failing imediately detecting a slave.

I am guessing ata_generic is preempting ata_piix on this machine. I will attempt to boot with SATA raid enabled in bios and see how a the SATA bios reports drives.

Revision history for this message
Shane R. Spencer (whardier) wrote :

Enabling SATA Raid in the bios allowed the adaptac bios to offer the right configuration to the kernel. new lsmod and dmesg in the attachement.

I now have sda/sdb vs broken/broken.

Revision history for this message
halw (wolfehl) wrote :

Thanks whardier, I disabled Raid in bios some time ago since I wasn't going to use it and got tired of see the message on boot. Will reset bios and see what happens.

Revision history for this message
Charlotte Curtis (c-f-curtis) wrote :
Revision history for this message
halw (wolfehl) wrote : Re: [Bug 87477] Re: Unusual Boot Messages

Yes. From the comments of 81164 seems to be same thing.

Charlotte Curtis <email address hidden> wrote: Is this the same as https://bugs.launchpad.net/ubuntu/+source/linux-
source-2.6.20/+bug/81164 ?

--
Unusual Boot Messages
https://launchpad.net/bugs/87477

Revision history for this message
Launchpad Janitor (janitor) wrote : This bug is now reported against the 'linux' package

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.