u-boot 2020.10+dfsg-1ubuntu0~18.04.2 source package in Ubuntu

Changelog

u-boot (2020.10+dfsg-1ubuntu0~18.04.2) bionic; urgency=medium

  * SRU of changes through to 2020.10+dfsg-1ubuntu6 to fix Pi4-8GB & CM4 support:

  * Add d/p/rpi-8gb-pci.patch for Pi400 and Pi4-8Gb support (LP: #1906552)
  * Add d/p/rpi-cm4-sdhci.patch for CM4 eMMC support
  * Add d/p/rpi-maxargs.patch for new Core 18 boot-env (LP: #1910094)
  * Remove redundant d/targets entries

u-boot (2020.10+dfsg-1ubuntu0~18.04.1) bionic; urgency=low

  * SRU of 2020.10+dfsg-1 to support Raspberry Pi 4 (LP: #1903054), and
    fix a failure to write issue (LP: #1900693)
  * Re-added d/p/lzo-to-lzno.patch as lzop is in universe prior to Groovy
  * Updated d/targets to remove arm-trusted-firmware references
  * Updated d/control for compatibility with bionic debhelper
  * Reinstate rpi-config-migration script for bionic

  [ Dave Jones ]
  * Merge from Debian unstable.  Remaining changes:
    - Enable Ubuntu support for the Nitrogen6x board (LP: #1838064)
      - Add d/p/ubuntu-nitrogen6q2g-config-tweaks.patch to tweak the
        nitrogen6q2g configs to better fit our Ubuntu usage.
      - Start building the nitrogen6x2g target for u-boot.
    - Enable FIT signing support (LP: #1831942)
      - Enable CONFIG_FIT_SIGNATURE so we can sign FIT images.
      - Add libssl-dev to Build-Depends: to enable crypto functionality.
      - Limit key names to keys within the keydir.
    - d/p/rpi-config-tweaks.patch: Configuration adjustments to the RPi
      configs
    - d/p/rpi-board-dt.patch: use the board's device-tree instead of an
      embedded one

  * Removed obsolete patches/changes:
    - d/p/lzo-to-lzno.patch: use gzip instead of lzo compression for FIT
      images as lzop in Ubuntu is in universe. This should be temporary and in
      the next releases ideally we should follow what Debian does.

u-boot (2020.10+dfsg-1) unstable; urgency=medium

  * New upstream release.

u-boot (2020.10~rc5+dfsg-1) experimental; urgency=medium

  [ Vagrant Cascadian ]
  * New upstream release candidate.
  * debian/control: u-boot-qemu: Set Multi-Arch: foreign.

  [ Uwe Kleine-König ]
  * control: Use https for upstream homepage

u-boot (2020.10~rc3+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * debian/patches: Refresh and remove obsolete patches.
  * [armhf] u-boot-sunxi: Add Bananapi_M2_Ultra (Closes: #962931). Thanks
    to Bernhard Wörner.
  * [arm64] u-boot-rockchip: Update rock-pi-4 .dtb names.
  * u-boot-qemu: Build firmware for qemu ppc e500 (Closes: #966624).

u-boot (2020.07+dfsg-2) unstable; urgency=medium

  [ Vagrant Cascadian ]
  * u-boot-install-rockchip: Update with additional RockPro64 names from
    linux 5.7 device-trees.

  [ Denis Pynkin ]
  * u-boot-rpi: Add rpi_arm64 target for arm64 (Closes: #966078).

  [ Vagrant Cascadian ]
  * debian/patches: Fix reproducibility of mx6cuboxi target.

u-boot (2020.07+dfsg-1) unstable; urgency=medium

  * New upstream release.
  * [armhf] u-boot-omap: Drop omap3_pandora, removed upstream.
  * [arm64] u-boot-amlogic: Install new board-specific documentation.
  * debian/patches: Fix riscv64 support for extlinux.
  * debian/control:
    - Upgrade to debhelper compat 13.
    - Update Build-Depends on arm-trusted-firmware.

u-boot (2020.07~rc4+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * debian/patches:
    - Remove pinebook-pro patches, applied upstream.
    - Remove riscv64 patches, applied upstream.
  * u-boot-rockchip: Update puma-rk3399 to include new
    rk3399-puma-haikou.dtb file.
  * Update lintian overrides to use "shared-library-lacks-prerequisites"
    instead of older tag name.

u-boot (2020.07~rc3+dfsg-1) experimental; urgency=medium

  [ Andreas Henriksson ]
  * u-boot-rpi: Enable rpi4 target on armhf and arm64 (Closes: #958668)

  [ Vagrant Cascadian ]
  * New upstream release candidate.
  * debian/patches: Refresh n900 patch.

u-boot (2020.07~rc2+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * debian/patches: Refresh.

u-boot (2020.04+dfsg-2ubuntu1) groovy; urgency=medium

  * Merge with 2020.04+dfsg-2 from Debian unstable. Remaining changes:
    - Enable Ubuntu support for the Nitrogen6x board (LP: #1838064)
      - Add d/p/ubuntu-nitrogen6q2g-config-tweaks.patch to tweak the
        nitrogen6q2g configs to better fit our Ubuntu usage.
      - Start building the nitrogen6x2g target for u-boot.
    - Enable FIT signing support (LP: #1831942)
      - Enable CONFIG_FIT_SIGNATURE so we can sign FIT images.
      - Add libssl-dev to Build-Depends: to enable crypto functionality.
      - Limit key names to keys within the keydir.
    - d/p/rpi-config-tweaks.patch: Configuration adjustments to the RPi
      configs
    - d/p/lzo-to-lzno.patch: use gzip instead of lzo compression for FIT
      images as lzop in Ubuntu is in universe. This should be temporary and in
      the next releases ideally we should follow what Debian does.
    - d/p/rpi-board-dt.patch: use the board's device-tree instead of an
      embedded one

  * Removed obsolete patches/changes:
    - Handle differing root partition labels during migration
    - Add script to migrate old boot configurations to split, selective style
    - Don't attempt config migration when /boot/firmware is a chroot
    - Use vc4-fkms-v3d overlay on all models of Raspberry Pi
    - Do not include the vc4-fkms-v3d overlay; this breaks book on the 3A+
    - Ensure boot.scr is from recent flash-kernel
    - d/p/rpi-import-mkknlimg.patch import tools/mkknlimg from Xenial/raspi2 -
      scripts/mkknlimg @ 83a3ebb
    - Remove redundant d/p/rpi-import-mkknlimg.patch
    - d/p/ubuntu-nitrogen6q2g-temporary-config-fixup.patch:
      Fix bad CRC issue. The env size and redundant environment config
      variables have not yet been migrated to Kconfig, so setting them in
      _defconfig has no effect. Set those manually.

  * Removed patches obsoleted/merged by upstream:
    - Use python2 for the build.
    - Added d/p/python2.patch to fix-up remaining scripts still using bare
      "python"
    - d/p/am57xx/omap5_distro_bootcmd
    - Correct odroid README paths
    - Add d/p/rpi4.patch to support Raspberry Pi 4 boot
    - Avoid device-tree memory fixup on Raspberry Pi 4; this allows access to
      the all the RAM on models with more than 1Gb
    - Add missing build dependency on arm/arm64

u-boot (2020.04+dfsg-2) unstable; urgency=medium

  * debian/patches:
    - Remove dreamplug cache patch, fixed upstream.
    - Add patches submitted upstream to support pinebook pro.
  * u-boot-rockchip:
    - Add support for rockpro64-rk3399.
    - Add support for pinebook-pro-rk3399.
    - Add u-boot-install-rockchip helper script.

u-boot (2020.04+dfsg-1) unstable; urgency=medium

  * New upstream release.

  [ Vagrant Cascadian ]
  * Update upstream signing key.
  * [arm64] Build arm-trusted-firmware into rockchip/sunxi systems.
  * [arm64] u-boot-sunxi: Add a64-olinuxino-emmc target Thanks to Philip
    Rinn. (Closes: #956394).

  [ Walter Lozano ]
  * debian/targets: Add support for rock-pi-4-rk3399
  * debian/targets: Add target idbloader.img for rk3399 boards

  [ Vagrant Cascadian ]
  * debian/control: Add versioned Build-Depends on arm-trusted-firmware
    for rk3399 support.
  * debian/targets: Add idbloader.img for all rockchip platforms.
  * u-boot-rockchip: Update README.Debian.
  * Remove debian/bin/generate-rksd.
  * u-boot-rockchip: firefly-rk3288: Also install u-boot.img.
  * [arm64] u-boot-rockchip, u-boot-sunxi: Add Built-Using
    arm-trusted-firmware.

u-boot (2020.04~rc5+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * debian/patches:
    - Remove patch fixing video on pinebook, fixed upstream.

u-boot (2020.04~rc2+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * debian/patches:
    - riscv64: refresh qemu-riscv64 extlinux patch.
    - exynos: Refresh patch fixing console.
    - Drop patches applied upstream.
  * debian/rules: Disable CONFIG_FIT_SIGNATURE in all targets, as it
    requires openssl which introduces license incompatibilities with the
    GPL.
  * u-boot-rockchip: Update firefly-rk3288 instructions.

u-boot (2020.01+dfsg-2) unstable; urgency=medium

  * debian/patches:
    - Fix video output on pinebook (Closes: #948753).
    - Fix exynos5 board detection (Closes: #951195). Thanks to Jochen
      Sprickerhof!
    - Fix MMC on odroid U3. (Closes: #950293)
    - Improve error handling with GPT renames. Fixes CVE-2020-8432.
  * debian/control: Update Standards-Version to 4.5.0, no changes.

u-boot (2020.01+dfsg-1) unstable; urgency=medium

  * New upstream release.
  * debian/rules: Do not call qcom wrapper script.
  * debian/control: Drop Build-Depends on "skales", removed from testing.
  * u-boot-rockchip: Use python3 in rockchip_make_fit_atf.
  * generate-rksd: Only generate SPL rksd on targets not using TPL.
  * Add build profile pkg.uboot.subarch.* to build only subsets of
    packages.
  * [arm64] u-boot-rockchip: Add arm-trusted-firmware and u-boot-tools to
    Recommends.

u-boot (2020.01~rc5+dfsg-1) experimental; urgency=medium

  * New upstream release candidate (Closes: #941231).
  * debian/control: Update Build-Depends to use python3 and
    libpython3-dev, add python3-distutils (Closes: #938739).
  * [armhf] u-boot-imx: install u-boot-dtb.imx on mx6qsabrelite and
    nitrogen6q.
  * debian/patches:
    - Remove mx6/Revert-spl-imx6-Let-spl_boot_device-return-USDHC1-or,
      applied upstream.
    - Refresh riscv64/qemu-riscv64_smode-sifive-fu540-fix-extlinux.
    - Remove mx6/arm-Set-SYS_DCACHE_OFF-for-MX6-platforms, it was an ugly
      workaround.

u-boot (2019.10+dfsg-1) experimental; urgency=medium

  * u-boot-sifive: Install new fu540 documentation.
  * debian/patches:
    - Add qemu-riscv64_smode-sifive-fu540-fix-extlinux-define to fix
      extlinux support on riscv64 targets.
    - Drop qemu-riscv64-raw-initrd, it is redundant due to
      DISTRO_DEFAULTS=y.
    - Disable dcache on MX6 platforms.
    - Add patch to revert changes to imx6 MMC boot device order.
  * debian/control:
    - Set Rules-Requires-Root: no.
    - Update Standards-Version to 4.1.1, no changes needed.

u-boot (2019.10~rc4+dfsg-1) experimental; urgency=medium

  * New upstream release candidate.
  * u-boot-rockchip: Add rock64-rk3328 target.
  * u-boot-rockchip: Install rockchip_make_fit_atf and Recommend python3.
  * generate-rksd: Add support for rk3328 and TPL images.
  * debian/patches:
    - Update ensure-config-sandbox-for-make-env.
    - Update qemu-riscv64-raw-initrd for.
    - Add description and forwarded links for qemu-riscv64-raw-initrd.
  * u-boot-qemu: Drop support for qemu_mips, qemu_mipsel and
    qemu_mips64el as the cross compilers are no longer available.
  * u-boot-tools:
    - Remove fw_printenv and fw_setenv and Recommend libubootenv-tool.
      (Closes: #939598)
    - Update package description.
  * README.Debian: Drop references to fw_setenv and fw_printenv.
  * debian/control:
    - [arm64] Drop Build-Depends on python-pyelftools; no longer needed
      for fit image creation.
    - Update Standards-Version to 4.4.0, no changes needed.
    - Update to debhelper-compat 12.
  * debian/copyright: Drop stanza and license for pcmcia; code was
    removed.

 -- Dave Jones <email address hidden>  Fri, 08 Jan 2021 15:51:00 +0000

Upload details

Uploaded by:
Dave Jones
Sponsored by:
Dimitri John Ledkov
Uploaded to:
Bionic
Original maintainer:
Ubuntu Developers
Architectures:
linux-any all
Section:
admin
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Bionic updates main admin

Downloads

File Size SHA-256 Checksum
u-boot_2020.10+dfsg.orig.tar.xz 12.7 MiB f16cd0189d1991aa7f56853348b2476c826a32f8af3d20ff5c941e45b7db9c50
u-boot_2020.10+dfsg-1ubuntu0~18.04.2.debian.tar.xz 48.9 KiB e58ea870c1ac323415a852a3b5c01b2d03f9131317ff31fd2a27e83c4c1d941f
u-boot_2020.10+dfsg-1ubuntu0~18.04.2.dsc 3.5 KiB 29464a3889fbe9382ffbca07a4982e3a73702cc040c13af50cf376849f08d1ed

View changes file

Binary packages built by this source

u-boot: A boot loader for embedded systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.

u-boot-amlogic: A boot loader for amlogic systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various amlogic platforms.
 .
 Included platforms:
 khadas-vim
 khadas-vim2
 libretech-cc
 nanopi-k2
 odroid-c2

u-boot-exynos: A boot loader for exynos systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Exynos platforms.
 .
 Included platforms:
 arndale
 odroid
 odroid-xu3

u-boot-imx: A boot loader for imx systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various imx platforms.
 .
 Included platforms:
 dh_imx6
 mx53loco
 mx6cuboxi
 mx6qsabrelite
 nitrogen6q
 nitrogen6q2g
 novena
 novena-rawsd
 udoo
 usbarmory
 wandboard

u-boot-mvebu: A boot loader for marvell systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Marvell platforms.
 .
 Included platforms:
 mvebu_espressobin-88f3720

u-boot-omap: A boot loader for omap systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various omap and related
 platforms.
 .
 Included platforms:
 am335x_boneblack
 am335x_evm
 am57xx_evm
 dra7xx_evm
 igep00x0
 nokia_rx51
 omap3_beagle
 omap4_panda

u-boot-qcom: A boot loader for qcom systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various qcom platforms.
 .
 Included platforms:
 dragonboard410c
 dragonboard820c

u-boot-qemu: A boot loader for qemu

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for qemu/kvm.
 .
 Included platforms:
 qemu-ppce500
 qemu-riscv64
 qemu-riscv64_smode
 qemu-x86
 qemu-x86_64
 qemu_arm
 qemu_arm64

u-boot-rockchip: A boot loader for rockchip systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Rockchip platforms.
 .
 Included platforms:
 firefly-rk3288

u-boot-rpi: A boot loader for Raspberry PI systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Raspberry PI
 platforms.
 .
 Included platforms:
 rpi_2
 rpi_3_32b
 rpi_4_32b

u-boot-sunxi: A boot loader for sunxi systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various Allwinner/sunxi
 platforms.
 .
 Included platforms:
 A10-OLinuXino-Lime
 A10s-OLinuXino-M
 A20-OLinuXino-Lime
 A20-OLinuXino-Lime2
 A20-OLinuXino-Lime2-eMMC
 A20-OLinuXino_MICRO
 A20-Olimex-SOM-EVB
 Bananapi
 Bananapi_M2_Ultra
 Bananapro
 CHIP
 Cubieboard
 Cubieboard2
 Cubieboard4
 Cubietruck
 Cubietruck_plus
 Lamobo_R1
 Linksprite_pcDuino
 Linksprite_pcDuino3
 Mini-X
 Sinovoip_BPI_M3
 bananapi_m2_berry
 nanopi_neo
 nanopi_neo_air
 orangepi_plus
 orangepi_zero

u-boot-tegra: A boot loader for NVIDIA Tegra systems

 Das U-Boot is a cross-platform bootloader for embedded systems,
 used as the default boot loader by several board vendors. It is
 intended to be easy to port and to debug, and runs on many
 supported architectures, including PPC, ARM, MIPS, x86, m68k,
 NIOS, and Microblaze.
 .
 This package includes boot loaders for various NVIDIA Tegra platforms.
 .
 Included platforms:
 jetson-tk1

u-boot-tools: companion tools for Das U-Boot bootloader

 This package includes programs for generating and listing U-Boot
 images in various formats:
  - mkimage
  - dumpimage
  - mksunxiboot
  - mkenvimage